What are hazardous waste D codes?
“D” CODES – CHARACTERISTIC WASTE CODES
Code | Description |
---|---|
D002 | CORROSIVE WASTE |
D003 | REACTIVE WASTE |
D004 | ARSENIC |
D005 | BARIUM |
How many toxic waste codes do the EPA regulate?
Both the P-and-U-Lists govern unused pharmaceuticals, chemicals, and pesticides. The P-List contains about 239 acutely toxic substances, with 135 different waste codes.
What are the 3 EPA source list?
These lists are organized into three categories:
- The F-list (non-specific source wastes).
- The K-list (source-specific wastes).
- The P-list and the U-list (discarded commercial chemical products).
What is waste code D001?
Wastes identified by the Environmental Protection agency (EPA) as Ignitable hazardous wastes are assigned a D001 waste code and must be managed as hazardous waste on site, according to your RCRA generator status.
What are f listed wastes?
F listed wastes are those particular wastestreams which come from certain common industrial or manufacturing processes. Generally, these are chemicals which have been used for their intended purpose in an industrial process.
What is the symbol for regulated waste?
biohazard symbol
Regulated Waste Containers All blood and other potentially infectious materials must be disposed of in properly labeled biohazard containers, in either a red bag or a predominantly orange or red container that has been imprinted with the biohazard symbol. Regulated waste containers must be: Sealable.
What is not considered regulated waste?
Vomit, feces, and urine as well as non-liquid or solidified blood are not typically considered regulated waste based on state or federal waste guidelines.
What is F003 waste code?
F003 The following spent non-halogenated solvents: Xylene, acetone, ethyl acetate, ethyl benzene, ethyl ether, methyl isobutyl ketone, n-butyl alcohol, cyclohexanone, and methanol; all spent solvent mixtures/ blends containing, before use, only the above spent nonhalogenated solvents; and all spent solvent mixtures/ …
What is D002 waste code?
Aqueous wastes with a pH greater than or equal to 12.5, or less than or equal to 2 are corrosive under EPA’s rules. A waste may also be corrosive if it has the ability to corrode steel in a specific EPA-approved test protocol. Corrosive wastes carry the waste code D002.
What is a hazardous waste code?
Hazardous waste is any solid waste that either exhibits any of the characteristics of hazardous waste or is a listed EPA waste. In addition, EPA Hazardous Waste Codes are also classified as acute and non-acute.
Is free cyanide regulated under the Safe Drinking Water Act?
Free cyanide is regulated under the Safe Drinking Water Act (SDWA). This document outlines and clarifies the Code of Federal Regulations entries associated with monitoring for cyanide under SDWA. Cyanide Clarification of Free and Total Cyanide Analysis for SDWA Compliance, Revision 1.0 (pdf) (June 2020, 815-B-20-004)
What is the EPA guidance on cyanide and sulfide-bearing wastes?
In July 1985, EPA issued interim guidance describing certain threshold levels for cyanide- and sulfide-bearing wastes and laboratory methods for evaluating such wastes. In April 1998, EPA withdrew the July 1985 guidance in a memo from Bussard and Johnson to Love (RCRA Online #14177 (PDF) (10 pp, 561.3 K, About PDF).
Is cyanide a hazardous waste?
EPA received many comments regarding the proposed rule for the identification and listing of hazardous waste and the inclusion in the reactivity definition of “any cyanide or sulfide bearing waste which can generate toxic gases, vapors or fumes when exposed to mild acidic or basic conditions.”