Table of Contents
What is 4135 steel?
chromium-molybdenum alloy steel
SAE 4135 is a medium-carbon chromium-molybdenum alloy steel for heavy-duty service. Although nominally an oil-hardening grade, it may be water hardened if proper precautions are exercised. It is used for a wide variety of engineering applications.
What is AISI 4140 steel called?
Other Designations
| AMS 6349 | ASTM A193 (B7, B7M) | ASTM A752 (4140) |
|---|---|---|
| AMS 6382 | ASTM A29 (4140) | SAE J1397 (4140) |
| AMS 6390 | ASTM A320 (L7, L7M, L7D) | SAE J404 (4140) |
| AMS 6395 | ASTM A322 (4140) | SAE J412 (4140) |
| AMS 6529 | ASTM A331 (4140) |
What is 4120 steel used for?
This low-alloy steel finds applications as forgings in the aerospace and oil and gas industries – as forged valve bodies and pumps – as well as in the automotive, agricultural and defense industries.
What is the carbon content of AISI 4135?
0.33 – 0.38
AISI / Alloy Steel 4135
| Chemical Analysis | |
|---|---|
| C% | Carbon 0.33 – 0.38 |
| Mn% | Manganese 0.70 – 0.90 |
| P% | Phosphorus 0.040 max |
| S% | Sulfur 0.040 max |
Is chromoly stronger than forged steel?
Is chromoly stronger than steel? Chromoly is stronger than normal steel, weight for weight, and is commonly used to make high-end bicycle frames, roll cages for race cars, and for fuselages on small aircraft.
What is 4135 alloy steel made of?
General characteristics of Alloy Steel 4135 Alloy steel 4135 is a low-alloy steel containing chromium and molybdenum as strengtheners. The alloy is capable of being heat treated to good strength levels while maintaining reasonable toughness.
What is the hardness of AISI 4135 steel?
AISI 4135 steel Annealing delivery hardness less than 250HB. AISI 4135 Alloy structural steel properties is a chromium molybdenum alloy steel specification. 4135 With a lower carbon content range, So the 4135 alloy steel have better weldability than AISI 4140 Alloy steel. Related Specifications ASTM A29/A29M DIN EN 10083/3 JIS G4053 GB GB/T 3077
How to prepare 4135 alloy steel for heat treatment?
The 4135 alloy steel will get MAX 250 HB （Brinell hardness）. Heated slowly to 850-880°C,Keep about 2 hours.Then cool in air. Heated slowly to 870-890°C, Then after adequate soaking at this temperature quench in oil. Temper as soon as tools reach room temperature.