Table of Contents
What is a cycle analyst?
The Cycle Analyst is the first digital dashboard and battery monitor originally designed around the specific needs of electric bicycles. However, the flexible setup configurations, wide feature range, and affordable price have also led it to widespread appeal in a range of other EV applications.
What is Statorade?
Statorade is a unique ferrofluid from Grin Technologies that is designed to increase dissipation heat from hub motors.
What is a torque sensor on an ebike?
A torque sensor measures how hard the rider is pedaling to determine how much electric power to push to the bike. The harder you pedal, the more power it gives to the motor. If you pedal lighter, less power goes to the motor.
How do I choose an ebike controller?
If you’re selecting a controller for a specific motor, check the controller voltage, and power. If you buy a non-programmable controller, ensure that the control voltage should be the same as motor voltage and the controller power should be the same or slightly more than the motor power.
What is the best cadence for an ebike?
around 75 pedal strokes per minute
Optimal cadence Most motors are at their most efficient with around 75 pedal strokes per minute. The fewer pedal strokes and slower the cadence, the earlier your ride will come to an end.
Do Ebike controllers get hot?
Ebike controller overheating can occur and it is not dangerous in the short term. Depending on the place where it is located, overheating can become a problem. First of all, check the location of your controller, if it’s getting hot too fast.
Is more torque better on an eBike?
Most ebikes have around 50 or 60 newton-metres of torque, while some deliver 80 or 85 newton-metres of torque. The more newton-metres of torque your motor can produce, the less hard your legs have to work to turn the pedals on your bike.
How do I increase my eBike range?
How To Increase Your Ebike’s Range
- Go easy on the throttle.
- Try to pedal while you accelerate.
- Coasting drastically increases your ebike range.
- Slow down a bit (and enjoy life)
- Keep your tires pumped up.
- Use regenerative braking if your ebike has it.
- Keep your battery fully charged whenever possible.
Is 350 watts enough for eBike?
If you’re of average weight, about 150 lbs, a 350 watt motor will have enough power for flat roads with a few moderate hills tossed in. You may have to pedal with the motor to get up some hills, but the beauty of an electric bike is that they assist you in such tasks.
What causes a motor controller to overheat?
The wrong voltage supply: Too many volts or too few volts can be damaging to a motor. When your motor doesn’t have the right voltage support, it needs to work harder to perform, which causes parts to overheat. A poor surrounding environment: A motor needs room to breathe so it can perform at its best.
What does ebike controller do?
Function. The electric bike speed controller sends signals to the bike’s motor hub in various voltages. These signals detect the direction of a rotor relative to the starter coil. The proper function of a speed control depends on the employment of various mechanisms.
What is the best cadence for an eBike?
How fast is 350 watts in mph?
Electric Scooter Adult 350W Motor, 15.5MPH Speed Max, 36V 10.4AH battery, Lightweight and Foldable Scooter for Adults and Teenagers, E-Scooter with LED Headlight, APP Contorl, Max Load 120KG.
What does Grin do for the electric bicycle movement?
Here at Grin, we’re deeply involved in many aspects of the electric bicycle movement. We design and manufacture unique electric bicycle hardware under our own GRIN brand (Cycle Analyst, Ebike lights, DC-DC converters, Torque Arms, Phaserunner and Grinfieon controllers, All Axle Hub Motor, the Satiator charger etc.)
Is the cycle analyst only for electric bikes?
The cycle analyst was Designed for use on electric Bikes but can be a very useful tool for EV’s of any kind. The new model has a host of amazing features not found on any other EV instrumentation.
What does throttle out mean on a grin controller?
Enabled: Throttle OUT voltage is set to Brake Out when ebrakes are applied and the rider throttle is ZERO. As the rider throttle is increased with ebrakes applied, the Throttle OUT voltage decreases from Brake Out to 0V to increase the proportional regen braking effect. All Grin controllers support this feature.