Table of Contents
What is the use of dbx compressor?
Adding a dbx® 166xs Compressor/Limiter/Gate to your live sound rig or studio gives you more dynamic control to help create a more polished, professional sound. Having compression in your audio chain gives you the ability to smooth out uneven levels, add sustain to guitars and fatten up your drums.
What is dbx 160 compressor used for?
The dbx® 160A’s unique “INFINITY +” inverse-compression mode actually decreases the audio output level below unity gain when the input exceeds threshold, a real lifesaver for correcting overbearing vocal choruses and controlling runaway house mix levels.
What type of compressor is a DBX?
The original Dbx 160 was a hard-knee compressor; later variants included soft-knee versions, but Waves’ emulation is modelled on the original hard-knee design. Blackmer’s design used a VCA built from discrete components as its gain-control element.
When should I use dbx 160?
The dbx 160 is commonly used for bringing punch and thwack out in drums, as well as being very popular on bass – real and synth.
How do I connect my external compressor to my mixer?
Insert a compressor in-line with one of the mic channels. Find the mic channel on the back of the mixer, and connect its insert send to the compressor input. Connect the compressor output to the insert return on the same mixer channel. On most analog mixers there is only one insert jack per channel.
What are the correct settings for compressing vocals?
Here are my go-to compression settings for vocals:
- Ratio: 1.5:1.
- Attack Time: 15ms (but up to 30ms for more punch)
- Release Time: 40ms.
- Threshold: -24dB.
- Gain Reduction: 2-3dB.
- Knee: Soft.
- Makeup Gain: 2dB.
What are good compressor settings?
Settings between 1.5:1 and 10:1 are the most common. A lower first number in your ratio will give you gentle compression you might apply to an entire mix, while a higher first number will give you an intense squashing effect.
What is the dbx 166xs compressor?
Table of Contentsdbx 166xs Section 1 – Introduction Congratulations on choosing the dbx 166xs Compressor/Limiter/Gate. The 166xs provides two channels of noise gating, OverEasy® or classic hard knee compression and PeakStop® limiting to give complete control of signal dynamics to studios, sound reinforcement companies,
How do I contact dbx 166xs support?
dbx 166xs Phone: (801) 566-8800 Website: dbxpro.com Support: dbxpro.com/en-US/support dbx Professional Products is a registered trademark of Harman © 2020Harman All rights reserved 166XS Owner’s Manual PN: 5055035-C
What is the manufacturer’s name and address for dbx Professional Products?
Manufacturer’s Name: dbx Professional Products Manufacturer’s Address: 10653 South River Front Parkway, #300 South Jordan, Utah 84095, USA declares that the product: Product name: dbx 166xs Note: Product name may be suffixed by the EU. Product option:• None conforms to the following Product Specifications: Safety: IEC 60065 -01+Amd 1
Where should the 166xs compressor be placed?
166xs compression. As a general rule, compressors should be as close to the amplifiers as possible in the signal chain. If the 166xs is placed before the EQ (equalizer), for example, a potentially damaging