How do I reset my Sena 10R?
Go in to the configuration menu. To restore factory default settings on the 10R, tap the (+) Button or the (-) Button until you hear a voice prompt, “Factory reset”, and tap the Center Button to confirm. The 10R powers off with a voice prompt, “Headset reset, goodbye”.
How do I factory reset my Sena?
2. Factory Reset.
- Press and Hold Phone button for 12 seconds until the LED shows solid Red, you hear double beeps and the voice prompt. ‘ Factory Reset’
- Within 5 seconds press the Jog Dial to confirm reset.
- If you don’t press the Jog Dial the Factory Reset is cancelled.
How do I reset my Sena helmet?
Fault Reset
- Partially pull out the neck roll from the rear side of the helmet.
- Locate the pinhole reset button as described below.
- Gently insert a paperclip into the hole and tap the Fault Reset Button with light pressure.
- The Bluetooth system will shut down.
How do I update my Sena headset?
How to Update Your Firmware:
- Run the Sena Bluetooth Device Manager from your computer.
- On the WELCOME screen, press the NEXT button.
- Follow the instructions to have your headset recognized then press the NEXT button.
How do I update firmware on Sena 10r?
Download and install the Sena Device Manager on your computer. Update the firmware of your Sena product with the Sena Device Manager. Reset your Sena product to the factory default setting (refer to the User’s Guide) and pair your Sena product with your Bluetooth device again.
Why wont my Sena turn on?
When the SRL2 is not working properly or is in faulty status like will not power on or the buttons are not responding, you may reset by pushing the pin-hole reset button located next to the DC Power Charging & Firmware Upgrade Port.
How do I reset my Sena r1?
- When the Bluetooth system is not working properly, you can easily reset the unit:
- Locate the pinhole reset button below Sena logo at the back side of the helmet.
- Gently insert a paper clip into the hole and press and Fault Reset Button for 1 second with light pressure.
Can Sena be repaired?
Sena will provide free-of-charge repair or replacement service for the product when product defects occur within the scope of the product warranty or water damage for communication devices due to excessive weather conditions occurring during the warranty period.
Does Sena have an app?
The Sena RideConnected App is a new application available for download on iPhone and Android smartphones. This new app is designed to allow you to communicate with fellow riders all over the world. By using your smartphone, you are not limited by the range or number of intercom connections as with Bluetooth.
How long is Sena warranty?
Full 2-Year Warranty Sena offers a generous 2-year warranty on all products new and refurbished.
Does Sena have a warranty?
Sena provides the warranty service ONLY through the sales channels where the purchase was made, with the exception of the United States. The following is the RMA (Return Merchandise Authorization) procedure according to the RMA address. – RMA from the store of purchase: Contact the store of purchase.
How do I reset my Sena 10S?
To restore the 10S to factory default settings, press and hold the Phone Button for 10 seconds until the LED shows solid red and you hear “Factory reset”. 2. Within 10 seconds, press the Jog Dial to confirm reset. The headset will be restored to factory setting and switched off automatically.
How do I pair my phone to my Sena 10S?
Press and hold the Phone Button for 5 seconds until you hear a voice prompt, “Phone pairing”. Search for Bluetooth devices on your mobile phone. Select the Sena 10S in the list of the devices detected on the mobile phone. Enter 0000 for the PIN.