Table of Contents
How much can you stroke 351 Windsor?
This stroker combination uses a 3.850″ stroke to produce 393 cubic inches from a 351 Windsor engine.
What size is a 408 motor?
You’ve probably already figured out from the title of our story that we’re going with 408 cubic inches (6.7L), which is accomplished with a 4.030-inch bore and 4.00-inch stroke.
How big can a 302 bore?
With an unfinished bore size of 4.120″ , Ford Performance BOSS 302 Big Bore blocks will support engine sizes up to 363 cubic inches.
What is the stock bore of a Ford 460?
See all 20 photos Ford 429 and 460 blocks share the same 4.36-inch bore diameter but juggled stroke to get 429 (3.59-inch stroke) or 460 (3.85-inch stroke) cubic inches. Any healthy 429 or 460 block can be made into our 501 with a 0.0305-inch overbore and 4.3905-inch bore diameter.
Who makes the best 408 stroker kit?
CNC-Motorsports offers the best selection of 351w-408 stroker kits.
How good is the 408 at low rpm?
Even below 3,000 rpm, the 408 thumped out serious torque, and we fully expect traction to be in limited supply. The test was not without incident, as we discovered the spring package on the Brodix heads isn’t quite sufficient for the aggressive ramp rates offered by the XFI cam profile.
How much torque does a 408 Stroker have?
The first thing you notice about the dyno results is the impressive torque curve. Given the mild state of tune, torque production from the 408 stroker exceeded 500 lb-ft from 3,400 rpm to 5,400 rpm. Even below 3,400 rpm, the torque output hovered near 500 lb-ft, so this stroker will have no trouble getting the Mach 1 moving in a real hurry.
How much horsepower does a 408 CID Ford Windsor make?
With this set up, the 408 cid Ford Windsor cranked out 532 ft.-lbs. of torque at 5,200 rpm and 579 horsepower at 6,500 rpm. For the second test, the Coast High team took the Holley Hi-Ram off and put on the Edelbrock Super Victor Jr. EFI intake with a 90-degree elbow and the 102mm throttle body.
What does 4RM mean on a Ford 408?
The abbreviation “4RM” stood for “4 Ruote Motrici”, meaning four-wheel drive. The 408 4RM was featured on the cover of Road & Track in December 1988. The 408 4RM is powered by a 90 ° rear and longitudinal mounted 4.0 L V8 that produces 300 hp (224 kW; 304 PS) at 6,250 rpm and 373 N⋅m (275 lb⋅ft) of torque.