Does a H23A have VTEC?

Does a H23A have VTEC?

The H23A DOHC VTEC Engine is largest displacement in the H Series engines with a compression ratio of 10.6:1. Found in the Japanese 1998-2002 Accord Wagon SiR (CH9). It produces 200 PS (147 kW; 197 hp) @ 6,800 rpm & 163 lb⋅ft (221 N⋅m) @ 5,300 rpm and comes with a “blue top”.

How much oil does a H23A take?

Engine Oil SAE 5W-30 is preferred. Capacity: With filter 4.5 quartsAfter refill check oil level.

How much oil does a 97 prelude take?

5.1 quartsAfter
Engine Oil With filter 5.1 quartsAfter refill check oil level. Without filter 4.8 quartsAfter refill check oil level.

Is a B18C JDM?

Jdm Honda B18C Engine TYPE-R 98-SPEC ITR 1.8L Dohc VTEC 5Spd LSD DC2. Actual Engine Serial Number: 2106266 as seen in pictures. Additional Shipping Charges may apply if your shipping address is in Rural or Remote Areas (small towns and counties) or would require you to pick up at closest dock location.

Is F20B a VTEC?

F20B. This engine series was used in the 1997-2001 CF4, CF5, CF9, CL3 Honda Accord and Honda Torneo from Japan. It uses a DOHC VTEC cylinder head similar to the H22A found in the Prelude but was designed to comply with many countries’ sub-2.0 liter tax.

What type of oil does a 1997 Honda Prelude take?

Engine Oil

Viscosity: Below 95 F .5W-30 Above 14 F .10W-30
Capacity: With filter 5.1 quartsAfter refill check oil level. Without filter 4.8 quartsAfter refill check oil level.
Torque: Oil Drain Plug…33 ft/lbs

What kind of oil does a Honda Prelude take?

Castrol – GTX 5W-20 High Mileage Synthetic Blend Motor Oil 5 Quart (Part No. 1597C4)

Does B18C have VTEC?

The B18C engine inherits the best of all the B-Series has to offer, with a 1.8L displacement and DOHC VTEC technology.

What kind of engine does a JDM Honda H23A have?

JDM HONDA H23A DOHC VTEC 2.3L ENGINE ACCORD 98-2002… JDM HONDA H22A OBD1 Engine Prelude BB1, H22A1 Motor…

What is the power of Honda H23A VTEC engine?

The H23A VTEC engine was installed in JDM Honda Accord Wagon AWD, where it reached 190 HP @ 6,800 rpm, and the torque of 221 Nm at 5,300 rpm. The same motor was installed in JDM Accord Wagon SiR, but its power was boosted to 200 HP @ 6,800 rpm with the torque of 221 Nm @ 5,300 rpm. On H23A VTEC, the redline was set to 7,200 rpm. 2.

What is the difference between H22A and H23A DOHC engines?

H23A DOHC VTEC has 87mm x 95mm (bore and stroke)and the H22A DOHC VTEC has 87mm x 90.7mm (bore and stroke). The H23A DOHC VTEC Engine is largest displacement in the H Series engines with a compression ratio of 10.6:1. Found in the Japanese 1998-2002 Accord Wagon SiR (CH9).

What kind of engine does an accord H23A have?

The H23A DOHC VTEC Engine is largest displacement in the H Series engines with a compression ratio of 10.6:1. Found in the Japanese 1998-2002 Accord Wagon SiR (CH9). It produces 200 PS (147 kW; 197 hp) @ 6,800 rpm & 163 lb·ft (221 N·m) @ 5,300 rpm. Found in the Japanese 1998-2002 Accord Wagon AWD (CL2).