Table of Contents
Can the Dewalt DW745 use a dado blade?
Unfortunately, the DeWALT DW745 is not compatible with a stacking dado blade set or with a wobbling dado blade.
Can you use a dado blade on a 10 Dewalt table saw?
Product Description. The DEWALT DWE7402DI Dado Throatplate for 10″ Portable Table Saw allows for use of stacked dado cutters.
Can I use an 8 inch dado blade on a 10 inch Dewalt table saw?
As long as the diameter of the arbor hole on the stacked dado blade set matches the arbor diameter of your table saw or radial-arm saw—and the arbor is long enough for a dado blade—you can use an 8-inch dado blade on a 10-inch table saw.
What replaced the DW745?
The DWE7485 is the newest model and can be seen as a replacement of the DW745, which although still for sale, seems to be slowly phased out as well. It has about the same size as the DW745, but doesn’t sport a full 10-inch blade anymore, and looks visually more like a small version of the DWE7491.
Can the DeWALT dwe7491 use dado blades?
With this new saw you can use a Dado blade up to 13/16″. Again it’s just nice to have the option. For power, Dewalt equipped this with a 15 amp motor that has 4800 RPM.
Can DeWALT DWE7480 use dado blades?
Now I’m afraid to say that you won’t be able to use a dado blade with this saw, this is due to the shaft on this saw not being long enough to accommodate it. If this is something that you really need from a saw.
What is the difference between a 10 and 8 table saw?
A 10-inch table saw will, roughly speaking, allow you to cut with a maximum depth of around 3-1/2 inches at 90 degrees and 2-1/4 inches at 45 degrees. 8-1/4 inch table saw you will be limited to approximately 2-1/5 inches of maximum depth at 90 degrees and 1-3/4 inches at 45 degrees.
Will dado blades fit any table saw?
Dado blades are made for table saws. You can adjust the dado blade to control the width through adjusting the blade or changing the number of cutters you are using. The method you use will depend on your table saw and dado blade set. Not all table saws are compatible with dado blades, so check your saw specifications.
Does the DeWALT dwe7485 accept dado blades?
Like the other DeWALT job site saws, you cannot add a dado stack. This isn’t exclusive to this model, but that’s a deal breaker to a lot of woodworkers.
Can I use a dado blade on Dewalt dwe7491?
Can you use a dado blade on Dewalt DWE7485?
Will a DeWalt dw745 table saw work with a dado blade?
While the DeWALT DW745 will not work with a dado blade, DeWALT does have Jobsite table saws that do. Also, you can find other table saw products from respected manufacturers that will also accommodate your cutting needs. Find a product that fits your budget and needs so you can get those dado joints made quickly and cleanly.
Does DeWalt make a throat plate for dado blades?
Also, DeWALT has not designed a throat plate for this model that will accommodate dado blades. Fortunately, DeWALT does offer a 90-day money-back guarantee in case you’ve already purchased this saw and its inability to host dado blade sets is a deal-breaker for you.
Does the dw745 have a spindle lock?
As I found out, the DW745 doesn’t have a spindle lock so you need to use both spanners for a blade change. I unplugged the power, raised the blade to the maximum height, used one of the supplied spanners to lock the spindle while using the other to undo the main blade bolt (regular thread, not reverse thread).
Why won’t my DeWalt mower handle a dado blade?
One issue is the arbor length, which will not provide enough space for a dado stack as well as the tightening nut to thread completely onto the arbor. Also, DeWALT has not designed a throat plate for this model that will accommodate dado blades.