Table of Contents
How long do fiberglass fence posts last?
The top three most popular questions that we are asked are about post spacing, the correct size of energizer, and the life span of our posts….How Long Will My Posts Last?
| O’Brien Treadaline Step-In-Post | 10-15 years |
|---|---|
| Fiberglass Rods | 20-30 years |
Do you need insulators on fiberglass posts?
If you have step-in posts they have built-in insulators and do not require an additional attachment, but for other posts select an insulator which will attach to your post type. Final posts are screwed into or hugged around the back. Fiberglass posts can be screwed onto or snapped onto.
How far apart do you put electric fence posts?
Post spacing can be up to 60-75 feet with high tensile wire on level ground. On hilly ground spacing should not exceed 30-40 feet.
How far apart should fiberglass fence posts be?
The post should be anchored 3 to 4 feet into the ground. Corner posts are the keys to a sturdy fence….Electric Fence Post Installation.
| Fencing parameters | Spacing (feet) |
|---|---|
| Electric | 12-20 |
| High-tensile, level terrain | 30-90 |
| High-tensile, difficult animals, rolling terrain | 15-20 |
| Poly tape and poly wire | 12 |
Can you use T Posts electric fence?
Permanent electric fences can be adequately constructed with wood posts, T-posts, rod posts, or metal posts. Typically, the type of post chosen is determined by local availability and price.
How many volts should an electric fence have?
The voltage of an electric fence should vary from about 2000 to about 10,000 volts. A 10,000 volt output is the maximum voltage allowed by international regulations. The voltage that is used depends on the desired power of the shock and the distance on the fence that can be shocked up to.
Can I use rebar to ground electric fence?
In most cases, pipe or rebar can be used. The grounding rod needs to be made of galvanized steel and also needs to be at least four feet in length for best results. Using copper rods will diminish the overall effectiveness of the electrical fence system.
How far apart should ground rods be for electric fence?
10 feet apart
A general rule is to install a minimum of 3 feet of ground rod per joule of output capacity. A 15 joule fence charger will require a minimum of 45 feet of ground rod. These rods must be installed at least 10 feet apart from each other.