Blog

How do I get my light timer to work?

September 17, 2022

How do I get my light timer to work?

How to Set a Light Timer

  1. Plug the light timer up and ensure your bulb does turn on and is not blown out.
  2. Turn your switch to the auto setting.
  3. Set the pointer on your light timer to the current time.
  4. Press down the tabs located around your dial for the times you want the light to on.

What causes dryer timer failure?

Malfunctioning cycling thermostat Another reason your dryer timer may not work is a defective cycling thermostat. This component moves the timer through its cycle and regulates the drum temperature on both gas and electric dryers with an Auto Dry cycle.

How do you set an Intermatic timer?

Press and hold the “on/off” button and press the reset button with a paperclip.

  • Press the “mode” button until the screen shows “setup”,then press “on/off”. This will enter the setup menu.
  • Set the current hour and minutes.
  • Set the current year,month,and date.
  • Select manual or auto daylight savings and your zone.

    • How to set an Intermatic timer?

    Open the door of the room where you will set the timer..Now use your hand. With the help of this,open the door in the gray box.

  • The large arrow on the clock indicates the current. The yellow clock should rotate the hand using the hand.
  • Now it’s time to loosen the arrows.
  • Need to set on or off arrows.

    • How to program an Intermatic timer?

    The dial only turns clockwise,so if you pass the correct time just keep turning it until you get there again.

  • Each line between numbers on the clock represents an interval of 20 minutes.
  • Don’t ever unscrew the arrow for the current time or you will throw off the timer.

    • How to program an Intermatic outdoor timer?

    How to program an intermatic heavy duty outside light timer just move the pegs and adjust the time of day easy!

    You May Also Like

    Your copyright text here !