Table of Contents
Why is my Somfy blinking red?
Once you plug-in the device and switch it on the myLink will blink red. Open the myLink app and press Start New System. Follow the prompts for setup as they appear on screen. The solid red LED light is an indicator that the myLink is in setup mode.
How do I reset my somfy WIFI?
How do I reset the Link?
- unplug the Link, the Link indicator light must be off.
- if the Link indicator light is still on:
- plug the Link back in while holding the button down for 8 seconds, then release the button.
What does it mean when the link light is flashing?
When the LED light on the Link flashes, it means that the connection has been lost. At the same time, the dashboard of the Somfy Protect application will display the message “The system is no longer connected at this time.” the WiFi network has changed; therefore, you need to reconnect the Link to this new network.
What does it mean when the link light is blinking on my modem?
A blinking light means you are having difficulty connecting to the internet. Ensure all telephone cable connections are tight and secure and reboot the modem and router (if applicable). POWER: A solid green light indicates the unit is properly connected to power. A blinking red light indicates a possible modem failure.
How do you pair a Somfy remote to shade?
Remember these are the last steps you follow, after you’ve added each one of your blinds to your Somfy remote(s).
- 1 Check you’ve set up your remote(s)
- 2 Choose a blind to group.
- 3 Put the blind into programming mode.
- 4 Choose your group channel.
- 5 Add your blind to your group channel.
- 6 Repeat to group more blinds.
How do you update your WIFI?
Expand Network adapters, and locate the network adapter for your device. Select the network adapter, press and hold (or right-click), then select Update driver > Search automatically for updated driver software, and then follow the instructions.
What does it mean when the link light is flashing orange?
A blinking orange light means it is in recovery mode due to a firmware fault. This information is specific to specific D-Link routers. You will need to re-flash the firmware for the router.
How do I contact Somfy support?
Go to the Somfy website and click support, from there open up a support ticket, or send them a mail explaining all the relevant details about your issue. After that, all you have to do is wait for them to respond. Just follow their step-by-step instructions to troubleshooting your problem and you’ll be all set.
Why is my Somfy remote not working?
How to Fix Somfy Remote Not Working? If you have been using a Somfy remote for a long time and are starting to experience issues with the remote not turning on sometimes, then it is likely that the battery cell has dried out. Over time, the batteries get weaker and weaker, so it is very common for the batteries to dry out after continuous use.
How to use a Somfy remote control for blinds?
Once they stop, you have to press and hold the button which is on the backside of the remote until the blinds move twice. Now just put the remote in the user mode and configure the max and min limits after pairing the remote with the Somfy motor.