How do I cold boot my Motorola MC9090?
To perform a cold boot: On an MC9090-G unit, while the battery is partially released, simultaneously press and release the trigger and Power button. On an MC9090-K or MC9090-S device, while the battery is partially released, simultaneously press and release the left scan button and the Power button.
How do I factory reset my MC9190?
Press and hold the red power button for about 5 seconds. The scanner will reset. This does not remove programs, erase settings, reset the clock or require a screen recalibration. Try this first!
How do I calibrate my MC9090?
Method 1 – MC9090 Battery Insertion
- Remove and re-insert the MC9090 battery.
- To calibrate the screen so the cursor on the touch screen aligns with the top of the stylus, carefully press and hold the tip of the stylus on the center of each target that appears on the screen.
- Repeat until complete, or press ESC to cancel.
How do you calibrate a barcode scanner?
The steps of setting up the calibration:
- Acquire a collection of images from the device.
- Load the images by clicking “Add File(s)…”.
- Set the desired barcode type for recognition and number of expected barcodes on a page.
- Goto “Calibration” inlay and click “Start”.
How do I factory reset my Motorola MC92N0?
Resetting Windows CE Devices to Default Settings
- Press the red Power button.
- Tap Safe Battery Swap.
- Press the primary battery release to partially eject the battery from the MC92N0.
- While the battery is partially released, simultaneously press and release the handle trigger and the Power button.
What does a cold boot do to the mc9090?
A cold boot restarts the MC9090 mobile computer. The operating system and all applications are restarted. File storage is preserved but settings and configuration will be erased. The Real-Time-Clock (RTC) will be reset. Only perform a cold boot if a warm boot does not solve the problem.
How do I troubleshoot Motorola mc9090 scanner problems?
A common resolution to these MC9090 problems is to try to perform a warm boot on the device. Performing a warm boot on a Motorola MC9090 will retain all persistent settings, while a cold boot will restore a MC9090 back to factory default. Follow the steps below to warm or cold boot your scanner based on its Operating System.
How do I eject the battery from my mc9090?
Press the primary battery release on the mobile computer to partially eject the battery from the device. On an MC9090 -G unit, while the battery is partially released, simultaneously press and release the trigger and Power button.
Why is my mc9090 stuck on a strange screen?
From time to time, your MC9090 handheld may get stuck on a strange screen, have application problems, or need hardware drivers reinitialized if certain hardware has stopped functioning. For example, reinitializing the scan driver if the scan engine is not detected.