Why is my washer spitting water?

Why is my washer spitting water?

Leaks at the front of the washer are often caused by a clogged overflow tube or an improperly-fitted old seal (in a front-loading washer). Leaks at the back of the washer are often caused by loose or damaged supply hoses. Leaks under the washer are often caused by a hole in the water pump or leaky internal hoses.

Why is my Whirlpool Duet leaking?

If your Whirlpool Duet is leaking, it is best to check the hoses first. There are three hoses of major concern: the main drain hose and separate cold and hot water hoses. Ensure all hoses are free of kinks or holes, and ensure all are attached properly to both the washing machine and the main water valve in your home.

Why is my Whirlpool front loader leaking?

The number one cause for leaks in a Whirlpool front load washing machine is due to a faulty drain hose. If you are experiencing water stains or wet floors in your laundry room, the main culprit could be your drain hose. The most common sign of a leaky drain hose is water collecting underneath the washer.

How do I stop my washing machine from Backflowing?

Washing machine hoses need to be extended with large standpipes placed at least 36″ above the washing machine’s top. This will help prevent siphoning, which is when wastewater flows back into the washing machine, but it will also prevent wastewater from backing up into the washing machine.

Why is my Whirlpool washing machine leaking from the bottom?

The drain hose most commonly leaks from the connection between the pump and the back of the washer. If the washer is pushed too far against the wall, the hose can rub against the wall and form a leak. Inspect the drain hose for leaks. If the drain hose is leaking, replace it.

Where is the filter on Whirlpool Duet washer?

The filter on a Whirlpool Duet is located under the front kick plate. A washer filter collects lint that falls from clothes during the washing process. The lint filter should be cleaned at least once every 6 months. If the lint is not removed, it can cycle back through the washing machine and stick to laundry.

Why won’t my Whirlpool duet front load washer turn on?

This is a fairly common problem with front load washing machines. It is also a very difficult and expensive repair. If the washer is out of warranty but sill fairly new you may want to try contacting Whirlpool… Unplug the washer for 30 seconds to attempt to reset the Duet washer control. Check the Duet door lock. (Duet Door Lock Check)

Why is there water in the bottom of my duet washer?

Problem: Water accumulates in the bottom of the Duet Washer drum between loads of laundry. Since the water is appearing after the washer has successfully completed a cycle, the problem could be with the washer or with the drainage lines.

Is your Whirlpool duet washer out of order?

So your Whirlpool Duet washer is out of order?! The good news is Whirlpool Duet washing machines have a diagnostic mode to help troubleshoot what’s the problem with your washer. Here’s the tricky part… There have been several washing machines that Whirlpool has chosen to name Duet.

Why does my Whirlpool duet washer smell?

Run a Duet Washer Quick Diagnostic Test and make sure that the washer is mechanically working correctly. If it is then you may want to try a different detergent. Whirlpool has made big improvements with the new Duet washers to reduce odors with an improved venting system.