What does a red X mean on my TV?
Updated 08/08/2016 10:59 AM. If you have a large red X on your screen, it means there’s a file error or a connection problem. Check the cable connections between your maxTV set-top box and the gateway/modem (see Your gateway information for pictures of SaskTel gateways).
What does a red X and 1 mean on U-verse?
Red X #1 and #10 (same) Hard drive failure/flash partitioning/formatting. If this in on the tv connected to your dvr then your dvr’s hard drive is almost certainly “toast”.
What does a red X on my Samsung TV mean?
no connection
Blue dots mean a connection, and a red X means no connection.
What does a red X and 8 mean on U-verse?
Former UVerse TV customer here. I can confirm that the red X means your box is DOA. 2.
How do you reset a Vodafone Ireland box?
How do I restore factory settings on my Vodafone TV set top box?
- Power off and on the box via the power switch.
- Immediately press and hold down the ‘OK’ and ‘down’ buttons on the device’s front panel during boot up.
- Keep the buttons held down until you see the green, blue and red icons flash 4 times.
How do I reset my AT U-verse box?
To do this, press and hold the Power button for 10 seconds. This takes 5-8 minutes and will impact any DVR recordings in progress. If you have multiple receivers, reboot your wireless gateway by unplugging it from its power source. Wait a few minutes, then plug it back in.
How do I reboot my ATT U-verse DVR?
Restart your U-verse TV receiver (DVR) by holding down the POWER button for 5 seconds, then press it again to restart. (This takes 5-8 minutes and impacts any DVR recordings in progress.) Press the Recorded TV button on your remote if your recorded program is frozen or missing.
How do I fix my U-verse connection?
Many receiver problems can be fixed by restarting your receiver. To do this, press and hold the Power button for 10 seconds. This takes 5-8 minutes and will impact any DVR recordings in progress. If you have multiple receivers, reboot your wireless gateway by unplugging it from its power source.
How do you reboot U-verse?
Restart your gateway or modem manually
- Unplug the power cord from the back of your gateway or modem. If you have:
- Wait 20 seconds.
- Put the internal battery back in if you have one.
- Plug the power cord back in.
- Wait up to 10 minutes for the gateway or modem to restart and your Broadband light to turn solid green.
How do I reboot my Vodafone TV box?
Power off and on the box via the power switch. Immediately press and hold down the ‘OK’ and ‘down’ buttons on the device’s front panel during boot up. Keep the buttons held down until you see the green, blue and red icons flash 4 times. Release the ‘OK’ and ‘down’ buttons and wait for the system to reboot.
Why is my Vodafone box not working?
Unplug your VodafoneTV Box, wait 5 seconds and plug it back in. After a few minutes, check your TV again. Hold down the 3 and yellow buttons on your remote. Wait for the remote power button to stop flashing and then check your TV.
Why is my ATT U-verse DVR not working?
Try these quick tips: Restart your U-verse TV receiver (DVR) by holding down the POWER button for 5 seconds, then press it again to restart. (This takes 5-8 minutes and impacts any DVR recordings in progress.) Press the Recorded TV button on your remote if your recorded program is frozen or missing.
Why is my TV not connecting to the Internet?
Try these simple methods to get your TV to connect to WIFI: Go into TV menu – SETTINGS – GENERAL – NETWORK – NETWORK STATUS and select NETWORK RESET. Update the firmware on your TV to the newest version. Turn off all firewalls as a test to be sure this is not causing issues. Go back to TV and try to connect to WIFI.
What does a red X mean on my U-verse TV?
Any U-Verse TV screen displaying a red X, Client Initialization error, or Diagnostic Info screen means your system is having trouble communicating. 1. Unplug the TV’s receiver.
How to fix the Red X on the TV screen?
Solve the Red X on the TV Screen? 1 Unplug your Wi-Fi Gateway. 2 Wait two minutes. 3 Plug your gateway back in and then power it on.
Why are the lights on my U-verse receiver blinking?
If the lights on your U-verse receiver are blinking and no TV picture is displayed, your receiver is having trouble coming online. Unplug your receiver and wait five minutes, plug it back in, and then restart. If you see three dots on your screen, it means your system is connecting.
Why does my AT router have a red X in it?
The screen is black and has a red x in the middle. The cable box power green light is on. The green link light is flashing and so is the red record light. If this is a wired receiver, make sure that the Ethernet/COAX cable is connected properly from the receiver to the wall/router. Rebooted your AT router.