Table of Contents
What does E04 mean on a Bosch washer?
Make note if the indicator “rinse” light is on and the display is flashing “E:04” on the Bosch washing machine. Check to ensure there is no water in the tub. This is a common error often associated with too many suds blocking the pump.
What does E04 mean on a washing machine?
Error code E04 means the washing machine has detected that there’s too much water in the drum.
How do I fix E04 error on my Bosch dishwasher?
You will get the Bosch Dishwasher Error Code E04 when there is a water flow sensor failure….If the Bosch Dishwasher Error Code E04 reappears, you need to clean the sprinkler:
- Remove the Sprinkler.
- Rinse it under running water.
- Brush nozzles with a toothpick or other objects in order to remove all dirt from holes.
How do I fix E4 error on washing machine?
When the washing machine shows error E4, the washing machine doesn’t get water or too little water to run the program. First, check whether the faucet is open properly. If it’s open, check the water supply. The inlet hose may be clogged or kinked.
How do I drain the water from my Bosch washing machine?
Here’s how to drain water from a Bosch washing machine drain hose:
- Turn off the washer’s water tap or valve.
- Unplug the washer.
- Open and remove the service flap on the bottom right corner of the washer.
- Unfasten the black drainage hose.
- Place a shallow container under the hose to capture draining water.
What is er4 one touch?
The OneTouch Verio® Meter displays messages when there are problems with the test strip, with the meter or when your glucose levels are above 600 mg/dL or below 20 mg/dL. Improper use may cause an inaccurate result without producing an error message.
What does error code E04 mean on Bosch washing machine?
The fairly frequent and persistent occurrence of error code e04 in a Bosch washing machine does not always signal about the powder troubles. It doesn’t mean that you select the wrong detergent or put too much of it. The E04 error code appears at the end of the washing cycle, during the operation of the drain pump.
Why does my Bosch washing machine keep saying error code 0x80?
It is caused by using the wrong laundry detergent which is not designed for high-efficiency washers. You can adjust your use of detergent and reset the machine to eliminate the error code. Use less detergent or the appropriate detergent for the wash load the next time you use the Bosch washing machine.
How do you reset a Bosch washing machine?
Turn the Bosch washing machine’s selector to “Off.” For a full reset, unplug the machine for 30 seconds and plug it back in. Turn the selector to “Drain,” and restart the drain program. As a native Californian, artist, journalist and published author, Laurie Brenner began writing professionally in 1975.