What is conversion varnish paint?
Conversion Varnish is a chemical-cured, fast-drying finish that consists of 2 parts: the finish and an acid catalyst that’s added just before spraying. The catalyst creates a chemical reaction (cross-linking) in conjunction with added heat-curing that creates the hardest, most durable finish available on the market.
What is Kemvar?
® Surfacer is an. acid catalyzed surfacer formulated to be used as a primer or sealer under Sher-Wood® KEMVAR® Plus Conversion Varnish or Sher-Wood® Water White Converson Varnish.
What is the difference between conversion varnish and polyurethane?
Conversion varnishes are typically only sprayed to a total of 4-5 mils dry film, while polyurethane can be built up to 10-12 mils dry film in some cases. This thicker layer also increases the durability of the coating. With grainy woods, you can more completely get into and seal pores.
Is water white conversion varnish clear?
Water White LF is a pale, clear, catalyzed coating material for finishing natural woods, pickled finishes, and other applications requiring good resistance to discoloration and yellowing.
Can you thin conversion varnish with lacquer thinner?
You don’t thin SW conversion varnish with lacquer thinner ever. You thin with Xylene. The other solvents present in lacquer thinner (primarily alcohols) are not compatible with conversion varnish.
What is the ratio for conversion varnish?
Mix 1 Part Catalyst to 10 Parts Conversion Varnish, Measured by Weight or Volume.
What causes conversion varnish crack?
Too much catalyst and an oily residue, called “bloom,” will develop on the surface, and the finish might crack. Too little catalyst and the finish won’t harden properly, and it may wrinkle when the next coat is applied.
Can conversion varnish be applied over paint?
CAUTION: Do NOT use GF Conversion Varnish or any other clear coat, over white or light paints such as GF Milk Paint, or GF White Poly as it may cause yellowing. Any clear coat can become reactive over wood substrates or existing finishes, causing tannin or dye bleed-though regardless of priming.
Is conversion varnish water based?
EM8000cv Pre-Catalyzed Waterborne Conversion Varnish is a waterborne, pre-catalyzed varnish formulated for high-end furniture and cabinetry applications that require exceptional surface hardness and water resistance coupled with a traditional CV-type color tone.
How do you mix conversion varnish?
Can you paint over conversion varnish?
Yes, you absolutely can paint over varnish with latex — provided you properly prepare the surface first.
How many coats of varnish should I apply?
For a very durable finish and one that needs to be very tough, say on a kitchen table, coffee table or end table etc, 2 to 3 coats of varnish should be enough on the top, with 1 to 2 coats on the legs/base. For chairs, benches, chests and other such pieces, 1 to 2 coats should do the trick.