What is MetriCide 28 used for?
MetriCide 28 is a 2.5% glutaraldehyde solution which, when activated, attains an alkaline pH of between 7.5 and 8.5, and can be used for the sterilization and high-level disinfection of various medical devices for up to 28 days.
What is MetriCide used for?
MetriCide OPA Plus is a high-level disinfectant for reprocessing heat-sensitive semi-critical medical devices for which sterilization is not suitable when used according to the instructions for use.
How do you dispose of MetriCide?
Waste Disposal Method: Flush thoroughly with water into sewage disposal system in accordance with federal, state, and local regulations. Do not reuse empty container. Wrap container and put in trash.
How do you use Wavicide?
At 21 °C (70°F) the 2% Wavicide-01 can be used and re-used as a sterilant for up to 30’days in manual systems (bucket and tray), DISINFECTION To prepare a 0.5% disinfecting solution use 1 gallon of 2% sterilizing solution pour into tray and odd 3 gallons of potable water To prepare a 1% solution for disinfecting pour 1 …
Is glutaraldehyde a disinfectant?
Glutaraldehyde is used as a cold sterilant to disinfect and clean heat-sensitive equipment such as dialysis instruments, surgical instruments, suction bottles, bronchoscopes, endoscopes, and ear, nose, and throat instruments.
How do you use OPA MetriCide?
Submerge the MetriCide OPA Plus Solution Test Strip indicator pad into the solution for two seconds and then remove. Shake the strip to remove excess solution. Hold the strip horizontally and read the results at 60 seconds. A yellow background dye is included in the indicator of each test strip.
Is MetriCide flammable?
Fire hazard: This product is not classified as flammable or combustible.
Can glutaraldehyde go down the drain?
glutaraldehyde and OPA. for treatment or neutralization with the intent of drain disposal. Dilution with water is prohibited. neutralizing it, and Do NOT pour neutralized glutaraldehyde and OPA down the drain without prior authorization from the local Publicly Owned Treatment Works (POTW).
How often should Wavicide be changed?
Sterilization time and temperature is 10 hours at 22 degrees C, high-level disinfection time is 45 minutes at 22 degrees C. After activation, Wavicide has a 1-year shelf life of unused product.
What is Wavicide?
Non-corrosive: Wavicide-01 is a 2.65% glutaraldehyde sterilant / high level disinfectant soaking solution that has been tested and approved for use with endoscopes and stainless steel surgical instruments. Ready to use: Wavicide-01 requires no activator saving you time and eliminating mixing errors.
How do you make Cidex solution?
Cover the CIDEXSolution Tray with a secure lid. Soak instruments for 12 minutes at 20ºC to achieve high level disinfection. Following disinfection, rinse instruments thoroughly, flushing the channels with potable or sterile water. Be sure to repeat this proce- dure twice, for a total of 3 rinses.
What is Envirocide used for?
Envirocide is a convenient, ready-to-use, intermediate-level surface disinfectant that is effective against TB, HBV, HCV, viruses (hydrophilic and lipophilic), bacteria (including MRSA and VRE) and fungi.