Table of Contents
Does AT 3G MicroCell still work?
Feb. 2022 is the final date for the complete shutdown of AT’s 3G service. Some service areas will start very soon to begin shutting down 3G devices.
What do lights on MicroCell mean?
Note: If the Network Light is flashing green, the MicroCell may be activating or downloading new software. During the activation process, it can take up to 90 minutes for your MicroCell to complete activation. If the light is still flashing after 90 minutes, refer to Step 5 on page 13 of the user manual.
How do I reset my AT 3G MicroCell?
Restart your MicroCell. Unplug the power adapter from the wall outlet, wait 10 seconds, then plug it back in. Wait 30 minutes for the Network light to turn solid green. In rare instances it may take up to 24 hours.
Does AT 3G MicroCell work with 4G?
An AT MicroCell acts like a mini-cell tower, radiating signal from inside the home or office to give you more bars. It increases you signal strength and is compatible with 2G, 3G, and 4G LTE.
How do I hard reset my AT MicroCell?
Hold in the reset button on the back of the unit (you’ll need a paperclip), turn off the power to it and then restore power holding in the reset button for about 30 seconds. The MicroCell should go thru the entire Initial Activation sequence which will include downloading any updates if they are available.
Why is my 3G MicroCell not working?
Turn your cell phone off and then turn it back on. If restarting your 3G, 4G or 4G LTE cell phone does not resolve the issue, then restart your MicroCell. Unplug the power adapter from the wall outlet, wait 10 seconds, then plug it back in. It may take an additional 30 minutes for the Network light to turn solid green.
Will 3G MicroCell work with 4G phone?
How do I know if my ATT cell booster is working?
Check network connections Confirm that your device is on the Cell Booster network and not on the Macro Network which may have poor coverage. When an active user is using the AT Cell Booster network the 4G LTE LED will flash white or when the 4G LTE LED is solid white, this means the device is ready to use.
How do I connect to AT 3G MicroCell?
Connect your MicroCell to a power outlet with the AC Power Adapter. The Power light on the front of the device will come on immediately. Within a few minutes, other lights will flash as a GPS signal is located and software is updated. Visit att.com/3GMicroCell-Activate and follow the instructions on the screen.
What is AT 3G MicroCell?
Product Description. This AT Microcell is built by Cisco Systems, a leader in cellular network technology. It can provide up to 5 bars of AT cell signal to your 3G and 4G mobile phones (including iPhone, Android, and Windows mobile).
What do lights mean on AT Cell Booster?
When an active user is using the AT Cell Booster network the 4G LTE LED will flash white or when the 4G LTE LED is solid white, this means the device is ready to use. 2. If your device is connected to the Cell Booster network, and you’re still experiencing dropped calls, check the back of your AT Cell Booster.
Why is my AT booster not working?
Make sure your Ethernet cable is connected to the WAN port on your Cell Booster and your router or gateway. If you have a modem and a separate router, try connecting your Cell Booster directly to your modem. Check the internet connection on other devices. Restart your router or gateway and your Cell Booster device.
How do I know if my AT Cell Booster is working?
Ensure that you are on the AT Cell Booster Pro network, and not the Macro Network (which may have poor coverage). The 4G C1 & C2 LEDs will flash white when an active wireless user is using the AT Cell Booster Pro network, and will be solid white when the device is ready for use.
Why is my ATT Cell Booster not working?
How can I tell if my ATT Cell Booster is working?
Confirm that your device is on the Cell Booster network and not on the Macro Network which may have poor coverage. When an active user is using the AT Cell Booster network the 4G LTE LED will flash white or when the 4G LTE LED is solid white, this means the device is ready to use.