Table of Contents
What are the different sizes of heater hose?
Heater hose comes in ½-, 8- or ¾-inch sizes and is usually sold by the foot. On some cars, the inlet hose could be a different size than the outlet hose, so don’t measure only one and assume they’re the same.
What size hose is heater hose?
The most common sizes of heater hose are 5/8″ and 3/4″. Inside a heater hose you can see the edges of the cords. Note the thin wall and sparse cord, this is low-pressure stuff. Radiator hoses are also lined with cords, but they are molded to shape.
Are silicone heater hoses better?
While rubber hoses are standard for radiator hoses, silicone hoses have a greater resistance to heat, and they are more durable and longer lasting. It’s for this very reason that replacing your coolant hoses with silicone hoses gives you more peace of mind.
What is the ID of 3/4 heater hose?
PRO 1 Heater Hose 3/4 Inch Inside Diameter X 6 Feet Length 052615C.
Can you use fuel line as heater hose?
No problems. I did some research at that time and it looked like fuel hose was resistant to antifreeze and was rated for a high enough temp. So, fuel hose can handle antifreeze, but not vice versa (radiator hoses can’t handle gas). And as bennie said, make sure you use FI rated fuel hose vs low pressure stuff.
What temperature is silicone tubing good for?
Silicone Tubing is odorless, tasteless, and is NSF approvedd as food-grade at temperatures from -100F to 500F. The translucent color allows you to see your wort flowing.
How long do silicone hoses last?
practically forever
Silicone hoses last practically forever and might possibly outlast your car. Because they have such a long lifespan, they can average out to a lower cost per mile compared to rubber hoses, even though their upfront cost is higher.
What is the ID of 5/8 heater hose?
PRO 1 Heater Hose 5/8 Inch Inside Diameter X 6 Feet Length 052615C.
What is the inside diameter of 5/8 heater hose?
Dimensions
| Actual inside diameter (in.) | .625 | .875 |
|---|---|---|
| Nominal Inside Pipe Diameter (In.) | 5/8″ | .1875 |
| Product Length (ft.) | 10 ft |
Can you run antifreeze through fuel line?
Fuel line is a petroleum-resistant nitrile tube with a covering that resists weathering, ozone and heat and can be used for ethanol-laced fuels and diesel fuel. It should, however, not be used on coolant systems, oil systems or fuel-injection systems that produce pressures higher than 50 psi.
How much heat can a silicone hose handle?
Silicone is one of the best compounds to use for high temperature purposes. It can endure exposure to high temperatures much better than most other materials. Typically, a high temperature silicone hose can handle temperatures that reach as high as 550° F.
Can you use silicone hose for radiator hose?
As such, silicone hose is ideal for use in radiator and water coolant systems. However, EPDM rubber hoses are also suitable for a variety of water coolant applications and can be more cost-effective than other materials when large quantities are required.
Do silicone hoses make a difference?
Silicone hoses benefit from superior flexibility compared to rubber. They maintain this flexibility over their lifespan unlike rubber hoses. This reduces the risk that your hoses will split, harden, or become dry rotted. Silicone hoses last practically forever and might possibly outlast your car.
Can silicone hose be used for radiator?
Are silicone hoses better than rubber?
What is the ID of heater hose?
Standard Heater Hose 5/8″ I.D. (Sold Per Foot) CQ1726: Advance Auto Parts.
Can fuel line be used for heater hose?
Standard rubber vacuum or heater hose should never be used in fuel applications. The hose will deteriorate from the inside out and can plug fuel filters and carburetors with rubber debris, long before it springs an external leak.
How many ounces is a 90 degree heater hose?
Gates created a 90 Degree Molded Heater Hose to make replacing hoses with existing sharp bends easy. Conveniently, our 38 sizes handle thousands of applications and are built to last. Gates Gates 90 Degree Molded Heater Hose 2.4 ounces
What is a heater hose?
A heater hose moves warm coolant from your water pump through your heater core and back again. The warm coolant in your heater core provides heat for your vehicle’s cabin. Like all hoses, heater hoses and fittings can wear out over time. The rubber can dry out, crack or split.
Why choose gates® 90° molded heater hose?
With the special 90° Molded Heater Hose solution from Gates®, you can easily install a hose meant for those inconvenient spaces on thousands of different applications with just 22 sizes. Free Up Some Shop Space.
Are there any Heat Hoses that adapt to sharp bends?
It can be difficult to find hoses that easily adapt to sharp bends in your assemblies. Gates created a 90 Degree Molded Heater Hose to make replacing hoses with existing sharp bends easy. Conveniently, our 38 sizes handle thousands of applications and are built to last.