How much does 10 gauge wire weigh?
Weight: 0.042 lbs per ft.
What does 10 feet of copper wire weigh?
Bare Copper Wire Data
| AWG B&S Gauge | Diameter (mils) | Weight per 1000 ft. (lbs.) |
|---|---|---|
| 7 | 144 | 62.8 |
| 8 | 128 | 49.6 |
| 9 | 114 | 39.3 |
| 10 | 102 | 31.5 |
What does 14 gauge copper wire weigh?
Weight per 500′ Spool: 8 lbs.
What is 10 gauge copper wire?
CSA listed RW90 type stranded copper wire. This wire is 10 AWG, normally good for 40 Amp when used in conduit with less than 3 conductors, though code requires fusing or a breaker of 30A for most applications. This wire is rated for use in dry or wet locations, raceways, or conduit.
What is the weight of copper wire?
Weight of copper wire.
| WEIGHT OF COPPER WIRE | ||
|---|---|---|
| Imperial Standard Wire Guage(S.W.G.) | Diameter | Weight |
| Wire Guage(S.W.G.) | inches | Kilos per 100m. |
| 7/0 | 0.500 | 113.1 |
| 6/0 | 0.464 | 97.6 |
How much does copper wiring weigh?
A 0000 gauge wire will weigh 640.5005 lbs per 1000 feet while a 40 gauge wire will weigh 0.0299 lbs per 1000 feet Standard copper wire weight information can be found in the following chart.
What is 10 gauge wire rated for?
30 amps
“Twelve-gauge wire is good for 20 amps, 10-gauge wire is good for 30 amps, 8-gauge is good for 40 amps, and 6-gauge is good for 55 amps,” and “The circuit breaker or fuse is always sized to protect the conductor [wire].”
What size is 10 gauge wire?
10 Gauge Thhn Wire Solid wire with a diameter of 10 thhn is 1/2.59mm. The diameter of 10 gauge stranded wire is 19/0.58mm.
How do you determine the weight of a wire?
Because its cross-sectional area is machined to such precision, calculating a wire’s weight is as simple as multiplying the cross section by the length by the density of the material.
How do you calculate cable weight per meter?
340.5 ( D2 – d2 ) G = lbs./1,000 ft. 340.5 ( D2 – d2 ) G = lbs./1,000 ft. 1362 Gt ( ( d+t )+( d+3t ) f ) = lbs./1,000 ft….Cable Design Formulas.
| Weight | = | 340.5 D2 GNK = lbs./1,000 ft. |
|---|---|---|
| G | = | specific gravity of conductor material; (8.89 for copper, 2.71 for aluminum) |
| N | = | number of strands |
What is SWG copper wire?
British Standard Wire Gauge (often abbreviated to Standard Wire Gauge or SWG) is a unit for denoting wire size given by BS 3737:1964 (now withdrawn). It is also known as the Imperial Wire Gauge or British Standard Gauge.
What is 10-gauge wire used for?
10-gauge are used in electric clothes dryers, 240-volt window air conditioners, electric water heaters supporting 30 amps. 6-gauge are used for cook tops and ranges carrying 40-50 amps. 4-gauge are used for electric furnaces and large electric heaters protected at 60 amps.
What is the density of copper wire?
8.96 g/cm3
Copper Wire Properties (Theoretical)
| Molecular Weight | 63.55 |
|---|---|
| Appearance | Reddish Metal |
| Melting Point | 1085 °C |
| Boiling Point | 2562 °C |
| Density | 8.96 g/cm3 |
What is SWG wire size?
Good to know: SWG or Standard Wire Gauge used for wire sizing and properties is also known as “British Standard Wire Gauge” and “British Standard Gauge” or “Imperial Wire Gauge”. *The data for resistance of copper and other wires in Ω/km and Ω/kft are at 20°C or 68°F. Wire Diameter in Inches “in”. dn = 5 x 10-3 x 92(36-n)÷39 = 0.005 x 92(36-n)÷39
What is the weight of a copper wire?
WEIGHT OF COPPER WIRE Imperial Standard Wire Guage (S.W.G.) Diameter Sectional Area Weight Weight 5/0 0.432 10.97 0.1466 85.0 4/0 0.400 10.16 0.1257 72.6 3/0 0.372 9.45 0.1087 62.5 2/0 0.348 8.84 0.0951 54.8
What data does the bare copper wire data display?
The following table displays bare copper wire data including the AWG gauge, wire diameter, cross-sectional area, weight per 1000 feet, and resistance per 1000 feet. *A circular mil is a term used to define conductor cross sectional areas using an arithmetic short-cut in which the area of a round wire is taken as “diameter in mils (0.001″) squared”.
What does SWG stand for?
The following Standard Wire Gauge (SWG) calculator will calculate the diameter in inches, mm, cross sectional area in inches2, mm2, and kcmil or MCM, resistance per 1000 feet and per 1000 meters and the maximum current capacity in amperes.