How do I turn on Auto-MDIX?

How do I turn on Auto-MDIX?

Auto MDIX is turned on by default. To disable Auto MDIX on a port, use the no mdix auto command under the interface configuration mode. To put it back to default, use the mdix auto command in the interface configuration mode.

What is the effect of using the mdix auto command?

What is the effect of issuing the BranchSw(config-if)# mdix auto command? It applies an IPv4 address to the virtual interface. It applies an IPv6 address to the virtual interface. It permits an IPv6 address to be configured on a switch physical interface.

What is MDIX in switch?

Media Independent Interface (MDI) and Media Independent Interface with Crossover (MDIX) are basically ports on a computer and a network switch, router, or hub, respectively. You can connect to them with the help of RJ-45 connectors and a fiber optic or a twisted pair copper cable.

What is MDIX mode on a HP switch?

mdix. The manual mode setting that configures the port for connecting to either a switch, hub, or other MDI-X device with a crossover cable, or to a PC or other MDI device with a straight-through cable.

What is Cisco auto-negotiation?

Auto-negotiation is the feature that allows a port on a switch, router, server, or other device to communicate with the device on the other end of the link to determine the optimal duplex mode and speed for the connection.

What is Auto MDIX quizlet?

What is auto-MDIX. a feature that detects Ethernet cable type. When a device is sending data to another device on a remote network, the Ethernet frame is sent to the MAC address of the default gateway.

Can the Catalyst 3750 switch be a VMPS server?

The Catalyst 3750 switch cannot be a VMPS server. You can also configure an access port with an attached Cisco IP Phone to use one VLAN for voice traffic and another VLAN for data traffic from a device attached to the phone. For more information about voice VLAN ports, see Chapter15, “Configuring Voice VLAN”

What interfaces are supported by auto-MDIX?

When you enable auto-MDIX, you must also set the interface speed and duplex to auto so that the feature operates correctly. Auto-MDIX is supported on all 10/100/1000-Mb/s and on 10/100/1000BASE-TX small form-factor pluggable (SFP)-module interfaces. It is not supported on 1000BASE-SX or -LX SFP module interfaces.

What is a VLAN on the catalyst 3750g integrated wireless LAN controller?

Note For information about the internal ports in the Catalyst 3750G Integrated Wireless LAN Controller switch, see Appendix A, “Configuring the Catalyst 3750G Integrated Wireless LAN Controller Switch.” A VLAN is a switched network that is logically segmented by function, team, or application, without regard to the physical location of the users.

What is Automatic Medium-Dependent Interface crossover (auto-MDIX)?

When automatic medium-dependent interface crossover (auto-MDIX) is enabled on an interface, the interface automatically detects the required cable connection type (straight through or crossover) and configures the connection appropriately.