What color is midnight bronze?
Cerakote Midnight Bronze is a rich dark bronze with a light gold metallic that is a perfect complement for a variety of blacks, greys, silvers, or earth tones, or as a standalone color.
What is the darkest Cerakote?
Cerakote Armor Black is the flattest black we offer. *NOTE: This product comes with a catalyst and requires a 150 Mesh Strainer (SE-276). Cerakote H Series coatings are durable, corrosion-resistant, and provide unparalleled levels of hardness and adhesion.
Can you Cerakote bronze?
Cerakote Burnt Bronze is a cocoa bronze highlighted by gold metallic. *NOTE: This product comes with a catalyst and requires a 100 Mesh Strainer (SE-275). Cerakote H Series coatings are durable, corrosion-resistant, and provide unparalleled levels of hardness and adhesion.
What temp is Cerakote good for?
Formulated to withstand temperatures up to 2,000 degrees Fahrenheit, the Cerakote high temperature ceramic coatings outperform all other high temperature coatings in the most extreme environments.
Can you touch up Cerakote?
(1mL) bottle of Cerakote (a part B catalyst is included with some as not all colors are air cure) to touch up any marks or scratches on your parts during assembly. We try to use High Temp C series of Cerakote for our touch up kits.
What color is burnt bronze?
brown-bronze
Description: US Burnt Bronze is a brown-bronze with a soft gold metallic flake. This color is a polyurethane metallic powder coat and has a satin finish.
What is midnight bronze?
Can you mix Cerakote colors?
No problem, you can mix colors within the same Series. You can mix H Series with H Series to create your own custom color.
What does burnt bronze look like?
Description: US Burnt Bronze is a brown-bronze with a soft gold metallic flake. This color is a polyurethane metallic powder coat and has a satin finish.
How much Cerakote do I mix?
ELITE SERIES MIXING RATIOS Cerakote Elite Series Cerakote Elite Series products can be mixed anywhere between 12:1 and 24:1 mixing ratios, we recommend you use one of the following three ratios for the desired finish.
How long can Cerakote sit before baking?
Recommended Cure Temperatures Cerakote can be cured at the maximum Recommended Cure Temperature listed in the All in one TDS, based on color and substrate. Standardized curing temperature for H-Series is done at 250°F for 2 hours following a 15 minute ambient flash time.
Can you do multiple coats of Cerakote?
Over curing the base coat, when applying multiple coats, may result in poor adhesion and flaking. Under curing can result in the base coating remaining soft or tacky. If applying stencils, the stencil may peel-up the base finish upon removal.
Can you mix C series and H series Cerakote?
DO NOT MIX DIFFERENT SERIES OF CERAKOTE TOGETHER! i.e. C-Series with H-Series.
Can you make Cerakote shiny?
The ONLY way to fix it is to sand blast it off and do it again. We Cerakote about 25 guns every day at the shop. You CANNOT TOUCH UP CERAKOTE EVER. Too much Hardener also makes it to glossy!
Why is my Cerakote rough?
Dry spray has a rough, sandpaper like appearance and is typically caused from poor solvent transfer during application. Cerakote should always have a smooth slick finish after product has been fully cured. During the application process it is very important to “Wet Out” the coating to avoid any possible dry spray.
How thick can Cerakote be applied?
Two of the most popular brands, Cerakote and DuraCoat, both recommend around 1 Mil thickness. You can get away with higher (1.5 mil) or lower (0.25 Mil) thicknesses but the goal is typically to shoot for around 1 Mil. As mentioned above, tight tolerances don’t always allow for 1 Mil, and you may be forced to drop down.
What colors go with Cerakote midnight bronze?
An error occurred while retrieving sharing information. Please try again later. Cerakote Midnight Bronze is a rich dark bronze with a light gold metallic that is a perfect complement for a variety of blacks, greys, silvers, or earth tones, or as a standalone color.
What type of strainer do I need for Cerakote H series?
*NOTE: This product comes with a catalyst and requires a 100 Mesh Strainer (SE-275) . Cerakote H Series coatings are durable, corrosion-resistant, and provide unparalleled levels of hardness and adhesion.
What are Cerakote H series coatings?
The foundation for Cerakote H Series coatings is a unique ceramic technology that imparts both flexibility and excellent wear resistance to the final coating. Check out the Resources section for product application guides, technical data sheets and SDS information.