Table of Contents
What size thread are tap tails?
The size of flexible tap tail is M12 (12mm) on tap connection end and 3/8 Inch BSP on the other end.
What size are M10 tap tails?
Pushfit Tap Tails 300mm M10 Male x 15mm.
Are all tap tails same size?
They come in pairs and have thread sizes of either 10mm or 12mm with each tap connector in the pair having slightly different lengths of solid tail to make access to tightening easier.
What size are IKEA tap tails?
1/2″ BSP x M8 (8mm) Flexible Monobloc Tap Connector Tails (Pair)
How are tap tails measured?
Use a ruler to measure across the thread diameter where the connector would attach. Include all the thread in your measurement. Now you’ve got your tap thread measurement, you can easily work out which tap connector is compatible for your tap.
What size is my tap connector?
Measuring BSP Sizes
| BSP Size | Diameter of the thread (mm) | Typical products you might find |
|---|---|---|
| 1/2″ | 20.9 | Shower hose, valves that screw into sink or basin taps, the rigid tails on basin taps, UK flexitail connectors |
| 3/4″ | 26.4 | Bath tap rigid tails, valves that fit into bath taps |
| 1″ | 33.2 | |
| 1.25″ | 41.9 | Basin wastes |
What size are European tap tails?
Adapts European monobloc mixer tap flexible connector tails for British 15mm pipe. 3/8 is a popular size in Europe and is used by many brands such as Grohe / Hansgrohe / Lidl.
What is M10 inlet size?
Description. Faucet tap water inlet blanking plug with M10 10mm thread size. Blanking plug is suitable to use with all bathroom or kitchen mixer taps with M10 (10mm) size water inlet, where one of the water inlets (either hot or cold) needs to be blanked, as only one water inlet to be used.
What thread is a tap connector?
Simply and securely attaches to your kitchen or bathroom tap. Leave this tap connector connected by unscrewing the plastic component for optimum use. Converts your tap into a 3/4″ BSP thread.
What size are tap connectors UK?
3/4” BSP
In the UK, the most common standard tap thread for outdoor taps is 3/4” BSP, but some older taps may be 1/2″ BSP. Hozelock’s 2175 Tap Connector comes with a 3/4” BSP thread and a 1/2″ BSP adaptor to make sure it is compatible with most common taps.
What size is the nut on a basin tap?
Tap backnuts typically measure either 27mm or 32mm AF (across flats), though they are more often described as being either 1/2 inch or 3/4 inch.
How many mm is a garden tap?
A standard 15mm garden tap has a 15mm BSP Male threaded inlet and 20mm BSP Male threaded outlet. A 20mm garden tap has a 20mm BSP Male threaded inlet and 25mm BSP Male threaded outlet.
How to tell if a tap is M10 or M12?
Just get a M10 screw or bolt and see if it screws into the body. If the tap is M12, the screw will almost fall in, if it is M10, you will be able to screw it in until it has little or no lateral movement.
What sizes do your Tap tails come in?
Choose from flexible tails or fixed copper tap tails in M10 and M12 sizes. All our tap tails are held in stock for Free UK nationwide delivery.
What is the size of the tap tail on the Blitz?
I can confirm the flexi tails supplied with the Blitz are M12 x 500mm 1/2 BSP. The Flexible Tap Tails 12mm X 15mm X 300mm 2 Pack (5891G) would therefore be suitable to use. 0 of 0 found this answer helpful.
What size are the flexi tails supplied with the Blitz?
I can confirm the flexi tails supplied with the Blitz are M12 x 500mm 1/2 BSP. The Flexible Tap Tails 12mm X 15mm X 300mm 2 Pack (5891G) would therefore be suitable to use.