Table of Contents
Why is my small generator not starting?
If there is no spark or if the spark appears weak, remove the spark plug and cap. Put the end of the spark plug wire near the engine’s body and pull the recoil starter to check the ignition coil. If there are now sparks appearing between the spark plug boot and engine, then the spark plug needs to be replaced.
How do I know if my generator is flooded?
The easiest way to tell if your engine is flooded with gas is to remove the spark plug. If it’s wet, it’s flooded and you’ll need to let the cylinder dry out before trying to restart. Compressed air can help speed up the process.
How do you start a flooded generator engine?
How to Start a Flooded Small Engine
- Unscrew the air filter cover from the small engine with the flathead screwdriver.
- Pull the cover off and pull out the air filter.
- Insert the screwdriver into the air intake valve of the engine.
- Turn the key or pull start the engine until it starts.
- Shut off the mower.
Does a generator have a reset button?
Reset Breaker for Power Tech Generators. Reset breakers are located on the control box of your generator along with the main on/off switch and main breakers. Reset breakers protect the circuit from surges. When your generator experiences a surge, these breakers need to be pushed in to be reset.
Why is my oil sensor not working on my Generator?
If the generator starts once this has been unplugged, then the oil sensor is not working. Many times, running the engine with this unplugged for several minutes before reconnecting the oil sensor wire will resolve the problem. Otherwise, the engine may require a complete tear-down in order to replace the oil sensor.
Why is there no fuel in my Generator?
If there is an in-line fuel filter between the fuel valve and carburetor, also check it to make sure it is not blocked. If you stored your generator for a long period of time without first draining the carburetor, the odds are high that it may be clogged by old gasoline.
How do I know if my generator is low on oil?
Just breathe easy, and follow these simple instructions to help diagnose your unit’s problems. Check the oil level in the crankcase. Add oil if the level is low. Keep in mind that attempting to run the generator on an uneven surface might cause the low-oil sensor to trigger despite there being enough oil.
Why does my Generator start but not charge the battery?
If the generator starts with the pull coil but not the electric start, it’s definitely an issue with the battery. If the generator has a starter coil, use that to start it in the meantime. This will charge the battery back to its usual level and it will work after running the generator for a while.