What is Gmax flushing system?
G-Max Flushing System: The G-Max flushing system provides a consistent and powerful flush with an extra-large siphon jet. The innovative system is quiet and simple and uses only 1.6 gallons per flush. This amounts to a considerable water savings every day.
What size are most flush valves?
2 inches
A standard toilet flush valve is 2 inches in size and works with most low-flow toilets and older toilet models. The most commonly found type in residential homes, it is the least expensive and most frequently purchased toilet flush valve.
What size is my toilet flush valve?
2″
Look at the flush valve drain opening at the bottom of your tank. If the opening looks about the size of a baseball or orange, you need a 2″ flapper. If the opening looks about the size of a softball or grapefruit, you need a 3″ flapper.
How do I adjust my G Max flush?
You can adjust the G-Max flushing system….
- Step 1: Turn Off Water Supply.
- Step 2: Remove Float From Fill Valve.
- Step 3: Remove Center Tube.
- Step 4: Hold Cup Above Fill Valve.
- Step 5: Run Water Until Clear.
- Step 6: Remove and Rinse Strainer.
- Step 7: Replace Center Tube and Cap.
- Step 8: Replace Float in Float Chamber.
How do you adjust the water level on a GMAX?
WATER LEVEL ADJUSTMENT To adjust, simply turn upper half of valve counter-clockwise to unlock, pull up til water level is where the water line is marked on the overflow pipe, Fig. A, then turn clockwise till valve snaps into locked position. 2. Turn on water supply to fill tank.
Are toilet valves universal?
There are several different types of fill valves commonly found in toilets, and you will need to be able to identify your type in order to make adjustments or replacements to yours. Some types of fill valves use older technologies and are best replaced with a newer type when repairs are called for.
Are toilet flushes universal?
They really actually all do the same job but operate slightly different. Most toilets are the same so it is just the mechanism’s that are different. The part of the toilet that stores the water is called the cistern and these will have in generally a 2” opening at the bottom to which the 1 ½” siphon sits into.
How do I increase the water pressure in my toilet?
Turn an adjustment screw located on the top of the valve. To raise the water level, turn the adjustment screw clockwise; to lower the water level, turn the screw counterclockwise.
How do you fix a G Max toilet that won’t flush?
Adjusting the G-Max flushing system correctly addresses both of these problems. Turn off the toilet water supply at the cutoff valve behind the toilet. Lift the lid off the toilet tank and place it on a flat surface out of the way. Pull the refill tube away from the G-Max fill valve with your fingers.
What is a G-Max flushing system?
TOTO’s G-Max flushing system is a bit different from most brands. The main difference is the fill valve portion of the system. Unlike other fill valves, the G-Max float sits inside a housing, resulting in fewer loose moving parts. As with any other system, adjustments become necessary over time.
What is a 400Ah toilet fill valve?
The most powerful toilet fill valve on the market. The 400AH is also known as the 400ARHR. With efficient and ultra-quite fill the 400AH replaces other inefficient, or outdated fill valve designs. Help prevent excessive or inadequate bowl fill levels.
Which Fluidmaster toilet fill valve should I use?
Read More Fluidmaster® recommends the PerforMAX® fill valve for toilets manufactured from 1994 to the current time (works on older toilets). If you are replacing the fill valve, we recommend you also replace the flapper with the 502 flapper for the best performance. The 502 flapper works on both old and new 2 inch flush valve toilets.