How do I add a VLAN to my EdgeRouter?

How do I add a VLAN to my EdgeRouter?

Set up your VLAN on the EdgeRouter

1. Enter 10 for VLAN ID.
2. For interface select “switch0”.
3. Add “Guest” for description.
4. For address select “Manually define IP address”. Enter the IP address “10.10. 10.1/24”. The router are always assigned the “1” address by custom.
5. Click “Save”.

How do I create a VLAN in EdgeSwitch?

Adding VLANs to the EdgeSwitch

1. Navigate to the VLANs. to add the VLANs to the EdgeSwitch. In this example, VLAN10 and VLAN20 are added. VLANs > New VLAN ID.
2. Fill in 10 and select the. icon to add the VLAN.
3. Fill in 20 and select the. icon to add the VLAN.
4. Apply the changes.

How do I setup a network VLAN?

First, VLAN support needs to be enabled on the switch if it is not already:

1. Choose Switch configuration.
2. Choose Advanced Features.
3. Choose VLAN Menu…
4. Choose VLAN Support.
5. Set Enable VLANs to Yes if it is not already, and choose a number of VLANs.
6. Restart the switch to apply the changes.

Is Pvid and native VLAN the same?

Hi, a port VLAN ID is the assigned VLAN of an access-port. The native VLAN is used in a trunk. A trunk is used to connect another switch or a device which belongs to more than 1 VLAN.

How do I set up Pvid?

Configure port PVID settings for untagged ports:

1. Go to Switching – VLAN – Advanced – Port PVID Configuration.
2. For each port marked as untagged above, set the PVID of that port to the VLAN ID of the VLAN it was assigned to.
3. Click Apply.
4. Select ports 6, 7, 8, 9, & 10 and type 20 in the PVID field.
5. Click Apply.

How do I connect my computer to a VLAN?

Configure VLANs in a Microsoft Windows Environment

1. Click Control Panel.
2. Click Network Connection.
3. Click the folder icon from the sub-manual bar.
4. Right-click the Sun Dual 10GbE SFP+ PCIe 2.0 Low Profile Adapter port, then select Properties.
5. Click Configure.
6. Click VLAN, then click on New.

How do I configure VLANs in edgerouter on a switch0 interface?

1. Log in to the EdgeRouter on one of the unused Ethernet ports. 2. Navigate to the Dashboard tab to define the VLAN IDs and associate the switch0 VIF interfaces with an IP address. 2. Create the DHCP scopes for the relevant VLANs. 4. Configure the switch0 interface to be VLAN-aware and tag/untag the VLANs on the ports.

How do I connect to the edgerouter via Ethernet cable?

Connect an Ethernet cable from a computer to the eth0 interface on the EdgeRouter. 2. Configure a static IP address on your computer in the 192.168.1.0/24 range (for example 192.168.1.11).

Can I set up a guest network with the edgerouter Lite?

Setting up a guest network with the EdgeRouter Lite – Scott Gruby’s Blog Skip to content Scott Gruby’s Blog Another semi-useless spot on the web… Posted onJuly 5, 2015August 13, 2016by Scott Gruby Setting up a guest network with the EdgeRouter Lite I recently purchased a Ubiquiti Networks EdgeRouter Liteto act as the router to my home network.

How do I configure the edgerouter to work with a static IP?

Connecting an Ethernet cable between the EdgeRouter and a workstation that is configured with a static IP address. 1. Connect an Ethernet cable from a computer to the eth0 interface on the EdgeRouter. 2. Configure a static IP address on your computer in the 192.168.1.0/24 range (for example 192.168.1.11).