How do you use Filtrete 3M?
Place the 3M Filtrete™ Air Filters vertically onto the center of the plastic mesh screens. Allow gaps on each side. Use the double-faced adhesive tape to attach the filter to the mesh screens. Install the plastic mesh screens with 3M Filtrete™ Air Filters back into the air conditioner.
How do you set the target temperature on a Filtrete thermostat?
To set a hold target temperature, touch HOLD and use the +/- icons to select your hold temperature. The HOLD icon will display on the HOME screen indicating you have changed the Target Temperature. The system will HOLD this temperature until you return to the manual screen and de-select HOLD by touching it.
How do I calibrate my digital thermostat?
Checking the calibration of your thermostat is easy and should be done once a year, generally in the fall. To do so, locate your home’s thermostat and tape an accurate thermometer on the wall next to it. Wait 15 minutes and check the temperature reading on both devices.
How do I reset my 3m Filtrete?
Turn on the air purifier. For Smart Air Purifiers, hold the FILTER button for 3 seconds to reset the filter life tracker. For traditional Room Air Purifiers, hold the RESET button for 3 seconds.
How do I reset my Filtrete filter?
Replace the filter cover by aligning the tabs on the bottom of the cover with the bottom of the device and then pushing the top of filter cover toward the air purifier until it locks into place. Turn on the air purifier, then hold the RESET button for 3 seconds to reset the filter change indicator.
How do you reset an air filter change indicator?
To reset any of the filter replacement indicators, press and hold filter type button that was replaced (HEPA or Carbon) until the light turns off. 3. Repeat for other filter types as needed. When replacing the hybrid filter, reset both the HEPA and carbon indicator lights.
How do you program a RiteTemp thermostat?
RiteTemp Thermostat Programming To run the preprogrammed Energy-Star approved program, select “Heat” or “Cool” with the mode switch. To create a custom program, press the “Program” button. Press the “Day” button to select the day you want to program. Press the “Next” button to select the time slot you want to program.
How do I know if my thermostat is calibrated?
Checking a Thermostat’s Calibration To do so, locate your home’s thermostat and tape an accurate thermometer on the wall next to it. Wait 15 minutes and check the temperature reading on both devices. If your readings are three or fewer degrees apart, you should be good to go.
How do you reset the atmosphere?
You need to reset your ATMOPSPHERE® unit by holding down the button underneath the red light. This would require a pin or similar as it is a small button. Hold it down until the light changes back to green.
How do I reset my Filtrete 3m air filter?
Turn on the air purifier, then hold the RESET button for 3 seconds to reset the filter change indicator.