Table of Contents
What is fuel pressure regulator 2 performance?
The fuel pressure regulator keeps the fuel pressure steady and lets the fuel system release excessive fuel in the fuel rail back to the fuel tank. It can be found built into the fuel rail assembly in some vehicles.
What is P2293 VW?
Code P2293 is a code indicating that the fuel pressure is different than commanded to the injectors by the ECM. The problem may cause various problems due to the fuel pressure being too low or high, if the sensor is failing or failed.
How much is fuel pressure regulator?
A fuel pressure regulator costs anywhere between $10 and $410. Factors that can affect its pricing include its condition, material, product fit, recommended use, color/finish, and set or kit inclusions. The labor cost for this type of repair may range from $100 to $125, depending on the rates in your area.
How much does it cost to replace a fuel pressure sensor?
On average, expect to pay between $200 and $340 total for a fuel rail pressure sensor replacement. What is this? Parts alone will set you back about $60 to $100 and the labor cost to replace the sensor will cost between $140 and $240.
How much does it cost to replace a fuel pressure regulator?
All together, the total cost of a fuel pressure regulator will run somewhere between $150 to $350 in most cases but it can easily go above $500 for electronic fuel pressure regulator replacement. To save money, it’s recommended to have an independent mechanic or repair shop do the work versus a dealership.
What does p0301 P0300 mean on the Audi A4?
P0300 is certainly a cause for concern, and can be a threat to the drivability the Audi A4. It will often be accompanied by codes P0301-P0308. These particular codes also indicate that there is a misfire detected, but they specify the cylinder it is taking place in.
What does the P0300 code on a cylinder mean?
If you have P0300 and one of these other codes, the cylinder indicated by these cylinder specific codes would be where to start looking for your problem. P0300 is a general and random misfire code, which means that the code is not going to tell you which cylinder is causing the misfire.
What are the symptoms of a P0300 Audi A4 misfire?
The P0300 Audi trouble code will trigger the A4’s service engine soon light. The vehicle itself may begin to run rough. It depends on how serious the misfire is. The vehicle may produce excess vibration, especially at lower RPM conditions
What does p0301-p0308 code mean?
It will often be accompanied by codes P0301-P0308. These particular codes also indicate that there is a misfire detected, but they specify the cylinder it is taking place in.