Is ecc803 same as ecc83?

Is ecc803 same as ecc83?

It has the same deep, tight low end that the ECC83S has but the mids in the ECC803S are even thicker and more harmonically complex than the ECC83S. The ECC803S is also a little hotter in the high end than the ECC83S. These are however not as high in gain as the JJ ECC83S. The ECC803S’s are about 10% lower in gain.

Are all 12AX7 the same?

You can interchange a 12AX7 with 12AT7, 12AU7, 12AY7 or 5751 as they are all the same pin structure, however they will each give you a different result in your amp. Each of these tubes has a different gain factor, which means some will give higher gain and others lower gain.

Is ECC83 the same as 12AX7?

The ECC83 Valve – also known as the 12AX7. The 12AX7 Valve (or 12AX7 vacuum Tube) is a small preamplifier valve which is identical to the ECC83 – same valve, just a different name. It has two identical triodes both of which have a high voltage gain.

Is a 12AX7 tube the same as ECC83?

The 12AX7 Valve (or 12AX7 vacuum Tube) is a small preamplifier valve which is identical to the ECC83 – same valve, just a different name. It has two identical triodes both of which have a high voltage gain. It is used in 99% of all guitar amplifiers.

What are the best ECC83 valves?

The most exclusive ECC83 12AX7 type is the Genalex Gold Lion ECC83. The Original Genalex Gold Lion ECC83/B759 tubes are considered among the best ECC83 / 12AX7 types ever made. . They exhibit a large detailed soundstage that is sought after by discerning audiophiles who demand the highest quality sound.

What is the difference between ECC83 and ECC82?

ECC82 = low gain, high current, high grid bias. ECC83 = high gain, low current, low grid bias. They may work in each others position, but the amps built to optimise the ECC82 in that position!

Can you swap a 12AX7 for an ECC83?

In this article, we’ll concentrate on the question of the ECC83 vs 12Ax7 tubes. The truth is, there is no difference at all between them, and each one is interchangeable with the other. 12Ax7 (Fig 1) is merely the American name of the tube.

Are ECC83 and 12AX7 the same?

What is a tungsol 12ax7/ecc803-s tube?

The Tungsol 12AX7/ECC803-S tube has gold plated pins and is low noise and low microphonics. From our review of this tube: “There are only so many ways to describe tube tone and most have become clichés. The Tung Sol 12AX7 has the gain and drive of a Chinese 12AX7 and the pure tone of a Mullard or Brimar.”

What is the difference between JJ ECC83 and ECC803S?

The ECC803S is also a little hotter in the high end than the ECC83S. These are however not as high in gain as the JJ ECC83S. The ECC803S’s are about 10% lower in gain. This is a great tube for V1 positions or for use in all positions in vintage amps.

Can an ECC803 tube be used in a combo amp?

I read on a tube retail website where it was recommended that the ecc803 tube should not be used in a combo amp only in a head.

What do you think about tungtung Sol tubes?

Tung Sols have more gain and they are very bright sounding. They can make an already bright amp like a Marshall sound shrill and thin in my experience with them. Some guys love them though. Let your ears be the judge. Preamp tubes are pretty cheap so buy a few and play around with them some. bvoris likes this.