Table of Contents
Which is the radial gradient?
A radial gradient is defined by a center point, an ending shape, and two or more color-stop points. To create a smooth gradient, the radial-gradient() function draws a series of concentric shapes radiating out from the center to the ending shape (and potentially beyond).
What is linear gradient and radial gradient?
CSS gradients let you display smooth transitions between two or more specified colors. CSS defines three types of gradients: Linear Gradients (goes down/up/left/right/diagonally) Radial Gradients (defined by their center) Conic Gradients (rotated around a center point)
How do you add a radial gradient in CSS?
The radial-gradient() function sets a radial gradient as the background image. A radial gradient is defined by its center. To create a radial gradient you must define at least two color stops.
What is linear gradient?
linear-gradient() The linear-gradient() CSS function creates an image consisting of a progressive transition between two or more colors along a straight line. Its result is an object of the data type, which is a special kind of .
How do you position a gradient in CSS?
The position of a radial gradient is the point at which the radial starts; i.e. the centre of the ellipse or circle. You can use either keywords or length units to give the position; similar to background-position. If you use lengths horizontal comes first, then vertical. Omitted keywords are assumed to be center.
How do you find the angle of a linear gradient?
How to set the Angle of a Linear Gradient. You can set the angle of the gradient line so that the gradient runs along that angle. You can specify this with an angle value (e.g. 45deg , 90deg , 180deg ) or with one of the keywords for specifying the angle (such as to top , to bottom , to top left , etc).
How do you calculate fall over distance?
FALL = GRADIENT X DISTANCE For example, calculate the fall in a 50 metre section of foul water pipework if the gradient is to be 1 in 80. A gradient of 1 in 80 is converted to a number instead of a ratio.
What is gradient position?
The position of a radial gradient is the point at which the radial starts; i.e. the centre of the ellipse or circle.
What is the default shape and size of a gradient?
By default, shape is ellipse, size is farthest-corner, and position is center. The following example shows a radial gradient with differently spaced color stops: The shape parameter defines the shape. It can take the value circle or ellipse. The default value is ellipse. The size parameter defines the size of the gradient.
What is the difference between gradient size and color stops?
Defines the size of the gradient. Possible values: Defines the position of the gradient. Default is “center” Color stops are the colors you want to render smooth transitions among. This value consists of a color value, followed by an optional stop position (a percentage between 0% and 100% or a length along the gradient axis).
How do I fine-tune the location of the gradient?
To fine-tune their locations, you can give each one zero, one, or two percentage or, for radial and linear gradients, absolute length values. If you specify the location as a percentage, 0% represents the starting point, while 100% represents the ending point; however, you can use values outside that range if necessary to get the effect you want.
How to create a gradient that progresses in a straight line?
If the first color stop is declared, and the value is greater than 0, the gradient will repeat, as the size of the line or arc is the difference between the first color stop and last color stop is less than 100% or 360 degrees. This example uses repeating-linear-gradient () to create a gradient that progresses repeatedly in a straight line.