Table of Contents
How do you pair a blue parrot b250xt?
Pairing to a Cell Phone Put your cell phone in Bluetooth Search/Scan Mode per the manufacturer’s instructions . Select “BlueParrott B250-XT USB” to pair . (Passcode is “0000” if needed .) When connected, you will hear a single tone and the indicator light will be flashing blue .
How do I reset my Blue Parrot b250xt?
Prerequisites
- Turn on your headset.
- Simultaneously press and hold the Volume up button and Volume down button until you hear two low tones.
- Your headset has now been reset. Your headset will automatically enter pairing mode after successfully resetting.
What is the multifunction button on Blue Parrot headset?
MFB: Abbreviation for “Multifunction Button .” Multipoint Mode: Multipoint Mode allows you to connect and switch between two Bluetooth devices . Paired: Two Bluetooth devices agree to communicate with one another .
Why is my blue parrot headset flashing red?
A slow flashing red LED while the headset is connected to your phone indicates the battery is low and the headset should be charged. You should also hear a low battery alert Steady red flashing every second on the B350-XT, B250-XT+ and B250-XT indicates the headset is not connected to a device.
How do I reset my parrot headset?
Hold the headset near your ear and press and hold the Parrott Button and the Volume Down buttons together for approximately 6-10 seconds until you see two quick purple flashes on the MFB . 3 . The headset Parrott Button is reset and the pairing memory is now clear . The headset will re-enter pairing mode .
What does the parrot button do?
By default, the Parrott Button activates your voice commands when not on a call, or mutes the microphone when you are on a call. However, the button can be configured for other functions, such as speed dial. To change the Parrott Button functionality, download and use the BlueParrott app for Android or iOS.
How do I sync my Parrot Bluetooth?
Parrot MINIKIT+:
- Start the car and ensure the car kit is on.
- Activate Bluetooth on your phone, and search for Bluetooth devices.
- Select “Parrot MINIKIT+” from the list.
- Enter 0000 on your phone when prompted.
- The Parrot MINIKIT+ will sound a beep when connected to your phone.
How do I know when my Blue Parrot headset is fully charged?
Connect the USB charging cable into the headset’s USB charging port . If the headset is not fully charged, the indicator will turn red . When the indicator turns blue and stays blue, the unit is fully charged .
Why is my blue parrot headset not working?
If you are using your headset with an Android smartphone, clearing the Bluetooth cache may resolve issues with pairing, button use, and audio.
How do I reset my Blue Parrot Bluetooth headset?
Power on the headset. Press and hold (6-10 seconds) both the BlueParrott Button™ and Volume Down button simultaneously until you see the Multi-function button quickly flash purple twice. The BlueParrott Button™ is now reset, and the pairing memory is clear. The headset will automatically re-enter pairing mode.
How do you answer a call on a Blueparrott headset?
To accept the incoming call and end the active call, press the MFB once to end, and then press it once again to answer . To accept the incoming call and place the active call on hold, quickly press the MFB twice . To reject the incoming call, press and hold the MFB for 1-2 seconds .
How do you use the Blue Parrot button?
Allows you to launch an application of your choice from your headset simply by pressing the BlueParrott Button on your headset. This easy access makes your favorite application that much easier to access when you are on the go. Note: When on an active call, the BlueParrott Button will function as mute.
Why is my Blue Parrot not connecting?
How do I connect my blueparrott B250 to my phone?
Place headset into pairing mode. Put your cell phone in Bluetooth Search/Scan Mode per the manufacturer’s instructions. Select “BlueParrott B250-XT USB” to pair.(Passcode is “0000” if needed.) When connected, you will hear a single tone and the indicator light will be flashing blue.
How do I charge my b250-xts headset?
B250-XTS User Manual PAGE 7 CHARGING THE HEADSET BATTERY POWER INDICATORS Connect the USB charging cord to the headset and the other end to a suitable USB charger . The MFB’s indicator light may turn green for several seconds while the headset determines the level of charge the battery is holding . Do not remove the headset from the charger .
How do I Pair my b250-xts with my phone?
B250-XTS User Manual PAGE 9 Pairing with a Phone Keep headset and phone no less than 7 .5 cm (3 in) and no more than 1 m (3 ft) apart while pairing . Keep other Bluetooth devices at least 15 m (50 ft) away, or turn them off . NOTE: The headset can be paired with up to 8 different devices but can only be connected to one at a time.
What is talk mode on b250-xts headset?
Talk Mode:Headset is in use with the cell phone while the cell phone is on an active call (blue light will flash) . B250-XTS User Manual PAGE 5 1 WHAT’S IN THE BOX? 1. B250-XTS Wireless Headset with Leatherette Ear Cushion 2. Foam Ear Cushion 3. Spare Windscreen 4. USB Charging Cable 5. Quick-Start Guide (not shown) 6.