Table of Contents
How do you change the pattern on a Whelen light bar?
TO CYCLE FORWARD THROUGH ALL PATTERNS: Activate the function you wish to change the flash pattern on, (Takedowns, alley lights etc…) and apply +12 volts to the Scan-Lock™ wire (WHITE-VIOLET) for less than 1 second and release. This will change the pattern. Repeat to go to next pattern.
How do you program a Whelen WeCan universal control point?
Click on the “WeCan” button on the menu bar. Select “Control Point” then “Program” from the fly-out. 4. A window will open to confirm that you are about to program a Control Point Module.
How do you change the flash pattern on a Whelen 600?
To advance to the next flash pattern – Apply +12VDC to the WHT/VIO wire for less than 1 second and release. To cycle backwards through the flash patterns – Apply +12VDC to the WHT/VIO wire for more than 1 second and release. To reset to the factory default flash pattern – Turn off power to the lighthead.
How do you sync Whelen ion?
Sync (GREY) – To sync two lightheads, configure both lightheads to display the same Phase 1 pattern. With the power off, connect the GREY wires from each lighthead together. When the lightheads are activated, their patterns will be synchronized.
What is Whelen command?
Whelen Command™ Designed to simplify control system programming, Whelen Command delivers the ability to program all Whelen control systems within one application. Featuring advanced universal features, Whelen Command is backward compatible and will fully support all future Whelen control systems.
Is Whelen command backward compatible with Cencom?
Featuring advanced universal features, Whelen Command is backward compatible and will fully support all future Whelen control systems. Whelen Command replaces the following programs: CenCom Sapphire™, CenCom Carbide™, CanTrol® WC, WeCan®, SmartLogic™ Flasher, and HHS3200 & HHS4200
Which Whelen programming software do I Need?
As of Spring 2019, Whelen Command will be the only Whelen programming software required and available. After downloading the zip file, extract all into a directory of your choosing.
How do I install Whelen on Windows?
As of Spring 2019, Whelen Command will be the only Whelen programming software required and available. After downloading the zip file, extract all into a directory of your choosing. Navigate to this directory using Windows Explorer and double click on setup.exe to begin the installation.