Table of Contents
What is a print server on a router?
Definition: Print server is a function embedded in your Router. It allows you to share your printer with computers that are connected to the Router.
What is a Linksys Wireless G Print Server?
The Wireless-G PrintServer with Multifunction Printer Support from Linksys allows you to easily share up a multifunction USB printers among all the computers in your wireless network, without the need for a dedicated computer to act as a server.
How do I reset my Linksys print server?
Unplug the PrintServer. Step 2: Press and hold the Reset button for 10 seconds while plugging the power back into the PrintServer at the same time. NOTE: This will reset the PrintServer to factory defaults.
What is my print server address?
Right-click your printer and select properties. Head into the Ports tab and the first column you’ll see will display the IP address of your printer. If your printer is connected to your router via USB then the router will be acting as a printer server.
How do I share a printer through a router?
The feature of Printer Sharing helps you share a printer with different computers connected to the router.
- Install the Driver of the Printer.
- Connect the Printer.
- Install the TP-Link USB Printer Controller Utility.
- Access the Printer.
What is a print server address?
The IP address of the printer server will most likely be the same as the IP address of the router. To find your router’s IP address, open up a command prompt from Windows’ Start menu Search box. Type ipconfig and hit Enter. The IP address will be listed under the entry marked Default Gateway.
How do I enable printer sharing on my router?
Turn on Sharing in Settings
- Select the Start button, then select Settings > Network & Internet > Wi-Fi.
- Under Related settings, select Change advanced sharing options.
- In the Advanced sharing settings dialog box, expand the Private section.
- Under File and printer sharing, select Turn on file and printer sharing.
How to manage the printserver on the network?
A Utility program called Print Server Management Utility – BiAdmin manages the PrintServer on the Network. It is compatible with Windows 95, 98, NT, ME, 2000, XP and Novell NetWare. Bi-Admin allows you to change the PrintServer’s internal settings, check on the unit’s status, and perform basic diagnostic tests.
How do I change the default password on my Linksys printsever?
Click . The Linksys PrintSever uses “admin” for a default password. If you want to change it for security reasons, follow the steps below. Click Init Device then Set Password. Enter the new password you want and retype the same password to confirm then click OK.
How do I verify my printserver’s password?
Under Verify Password enter your PrintServer’s password (“admin” is the default password), then click OK. NOTE: If the PrintServer’s password has been changed, type the PrintServer’s new password instead. The PrintServer’s password can be changed by: Running the PrintServer’s setup CD. Changing it on the PrintServer’s web-based setup page.