Table of Contents
How do I reset my Sagemcom 2864?
If it is unknown then do a reset to factory default, using a paper-clip in the reset hole on the back. Hold until the power light turns off to reset. The user name and password will now be as above. Note: The Sagemcom 2864 doesn’t act like other modems after a factory reset.
How do I reset my sagemcom WIFI?
Turn the back of your modem towards you. Tap and hold the Factory reset button for about 7 seconds using a sharp-pointed object (such as a paper clip). Wait while your modem restores the factory default settings.
What do the lights mean on a sagemcom router?
Sagemcom modems have lights to indicate power, the status and activity of the DSL line, and the status and activity of wireless connections to your computer. Information is communicated by whether the lights are on, off or flashing. Activity on a line is often indicated by flickering lights, when the line is active.
How do I open Optus router settings?
OTHER OPTUS DSL MODEMS/ROUTERS
- Your modem must be switched on and connected to your computer (wired or wirelessly)
- Open your internet browser and go to this address: http://192.168.8.1.
- Enter the default username (if required): admin.
- Enter the default password (if required): password.
What is the IP address of my Optus modem?
The gateway address can be found labelled on the bottom of your modem, under admin IP. Depending on the model of your modem, the gateway address may differ. It will be in the format 192.168. x.x.
How do I find my IP address on my Spectrum router?
Go to System Preferences and open Network. Under the selected network, select the Advanced button. Under the TCP/IP tab, find Router. Next to this you can locate the IP address.
Is sagemcom a router or modem?
Product Description. 5260 Dual Band 802.11ac Wireless Router with 4 Ports and 1x Ethernet Port Wireless-AC technology. Using the latest 802.11 ac wireless technology, the router provides you with maximum speed and range without the hassle of cumbersome wires.
How do I reset Optus sagemcom?
Restart Your Modem and Sagemcom WiFi gateway Turn off the power at the back of both devices, wait 10 seconds and turn on the power for the modem first, then the gateway. Wait a few minutes for the devices to restart which will reset your connection.
How do I fix my sagemcom router?
How to reset a router to factory defaults
- Step 1: Find the reset button. There should be a tiny reset button.
- Step 2: Push the reset button. While the router is on, push and hold the reset button.
- Step 3: Hold the reset button.
- Step 4: Reboot the router.
- Step 5: Log in to the router.
How do I Find my Sagem fast 2864 IP address?
The default Sagem FAST 2864 IP Address is: 192.168.2.1 After entering the IP address of your router you can simply press enter. If all goes well you will see the following screen: Screenshot of Sagem FAST-2864. You should see a box prompting you for your username and password.
Does the Sagemcom 2864 modem reset the password?
While most modems erase the password, reset everything to factory defaults and thus will not connect, the Sagemcom 2864 does not erase the password, but it does reset everything else to factory defaults.
How do I open a port on my Sagem router?
This process of opening a port is frequently called a port forward, since you are forwarding a port from the internet to your home network. The basic process to open a port is: Setup a static IP address on either your computer or device that you want to forward a port to. Login to your Sagem FAST 2864 router.
What are the ports on a 2864 router?
Sagemcom F@st 2864 provides one WAN port for FTTH, an RJ-11 jack for VDSL connection, four GigE LAN ports, an HPNA connector, 802.11b/g/n wireless LAN for connectivity and 2 USB ports. It supports wireless speeds of up to 300Mbps.