Table of Contents
How do I connect my Z-Wave light switch to SmartThings?
`A Z-Wave Smart Switch is often a useful addition to a smart home….Integrating Z-Wave Smart Switch With SmartThings Hub
- Ensure the device is in pairing mode.
- Go to the Things section of the SmartThings app and select Add a Thing.
- SmartThings will now search for new devices. Be patient! This may take some time.
How do I connect my GE smart switch?
- Launch the C by GE app on your phone or tablet.
- Tap Add in the top right corner.
- Then tap Add New Devices.
- Select C-Start Switches.
- Tap Get Started.
- Tap Continue when you see that light.
- Select the smart switch from the list. Select Continue to proceed.
- Select your WiFi network from the list and tap Continue.
How do you reset a Z-Wave light switch?
For all our Z-wave plus in-wall switches you will click the upper switch 3 times rapidly, and the lower switch 3 times rapidly. On our paddle switches the blue LED will flash 5 times to confirm the reset (there is no LED on the toggle switches to confirm the reset).
How do you reset a GE switch?
Press and hold your switch’s button, toggle, or paddle for 10 seconds. If the reset is successful, the indicator light will begin blinking blue meaning the switch is ready to be set up again.
How do you reset a GE smart light switch?
1 Reset Smart Switch Press and hold your switch’s button, toggle, or paddle for 10 seconds. If the reset is successful, the indicator light will begin blinking blue meaning the switch is ready to be set up again.
How do I reset my GE smart wall outlet?
Factory Reset Indoor Smart Plugs
- While the Indoor Smart Plug is plugged into a wall outlet, hold the side on/off button, for at least 10 seconds.
- When LED indicator light turns red, let go of the button. The Indoor Smart Plug has been successfully reset.
How do I reset my Zwave plug?
Reset to factory default If plugged in, unplug the Switch from the receptacle. 2. Press and hold the top button for at least 3 seconds whileyou plug the switch into a receptacle. Note: This should only be used in the event your networksprimary controller is missing or otherwise inoperable.
How do you add a Z-Wave device to SmartThings?
How to add generic Z-Wave devices to SmartThings
- Click the plus button and select ‘device’.
- Select the brand ‘Z-Wave’.
- Click ‘Generic Z-Wave Device’.
- Click ‘Start’.
- Follow your devices inclusion procedure.
- Name your device and click ‘Done’.
How do I reset my GE wireless switch?