Table of Contents
Are all pegboard holes the same size?
Pegboard Specs All pegboard has holes with 1-in. spacing, but there are two thicknesses and two hole sizes available. Small hole pegboard is usually 1/8-in. -thick hardboard with 3/16-in.
What is the most common pegboard hole size?
9/32 hole
Most pegboard has a 9/32 hole diameter. However, some pegboard has holes with an exact ¼” diameter.
How do you keep pegboards from falling out of pegs?
To ensure hooks won’t fall out of your board, you have 4 options:
- Get the perfect hooks with double peg attachment and appropriate thickness for your board.
- Use metal wire to secure thin hooks.
- Use glue or a zip tie to secure the thin hooks to your board.
- Use plastic peg locks.
What is standard pegboard size?
Pegboard is produced from MDF and HDF (High Density Fiberboard). Standard patterns offered are 1″ x 1″ OC, 1/2″ x 1/2″ OC, 1″ x 2″ OC, and 1″ x 3″ OC. Hole sizes are 9/32″ diameter (nominal 1/4″) and 3/16″ diameter (nominal 1/8″).
How much weight can a pegboard hold?
100 lbs
Pegboard manufacturers state the standard 3/16″ pegboard can safely hold 100 lbs of weight. The pegboard I tested showed a single peg can hold over 150 lbs without tearing or pulling away from the wall.
How do you attach furring strips to pegboard?
Use a power drill or screwdriver to attach the furring strips to the back of the pegboard. Attach 3/4 -in. wood screws at the top and bottom of each strip and in the center. Do not attach the wood screws using the pre-drilled holes of the pegboard.
How can I make my peg board look better?
5 Ways to Make a Boring Pegboard on Fleek!
- Frame it! One of the things that bothered me the most about the classic pegboard setup is that it looks a little unfinished when it’s just hung on the wall as is.
- Paint it!
- Add some pattern!
- Accessorize it (with your color theme)!
- Go a little green!
What size dowels fit in pegboard?
Darice System: Wooden Pegboard Dowels, 1.25 x 2.75 Inches, 4 Pieces, Unfinished/Natural.
Can I spray paint pegboard?
When painting pegboard, we would recommend using a paint gun (or spray paint) over rollers. When using rollers, it will be much easier to get the pegboard holes clogged up, which makes it harder to fill your board with all your pegboard accessories once it’s painted.
How do you install pegboard spacers?
Insert a screw with a washer into each marked hole on the pegboard, then fit a spacer onto each screw, on the back side of the pegboard. Position the pegboard against the wall and drive each screw into its corresponding anchor or into a wall stud. If you’re not using a spacer kit, use 2-inch washer head wood screws.
What are furring strips for pegboard?
But wait, what is a furring strip?! They’re often used for cinderblock or concrete walls when you want to cover it up or attach drywall. In this case, furring strips are used to create some dead space between the pegboard and the wall so the pegs or hooks can fit.
Does pegboard need furring strips?
Most pegboards need wooden furring strips mounted on the back to provide a gap so the pegs or hooks will fit properly. Use the pegboard measurement to determine the number of 1- x 2-in. furring strips you’ll need.
Should you paint pegboard?
How do I make my pegboard look nice?
Building a frame is a great way to give a finished look to the edges so your pegboard looks more polished. If you aren’t into building your own, you can also have a custom frame built for it at a framing shop or buy as large a frame as you can find and then cut your pegboard to that size.