How do you reset a Mini Cooper?

How do you reset a Mini Cooper?

Press and hold the “trip reset” button for three seconds to navigate up through the menu until you reach “21. rESEt.” Run this test to reset the computer, then it will return you to normal operating mode. Navigate back to “0. tEST” and press the trip reset button.

Why is my airbag light on in my Mini Cooper?

On 1st Gen/Mk1 R50/52/53 MINIs most airbag warning light faults are due to a mommentary bad connection to the seat airbag wiring harness when a seat is moved/adjusted, therefore storing a fault code and triggering the warning light.

How do I turn off the airbag light on my BMW?

Answer provided by

  1. Turn on your car and make sure that the airbag light is on.
  2. Wait for seven seconds, then turn your car back off.
  3. Repeat this process two more times. Your airbag light should turn off.

Can changing a battery cause an airbag light to come on?

The light might have came on before you disconnected the bad battery due to low voltage to the system. Once you put in the new battery, the system still has a stored code and the light will be on until it is scanned and checked, then cleared of any codes.

How do I reset my r53?

With the key in the ignition, but in the off position, press and hold down the odometer reset button with one hand. While holding the button down, switch the key in the ignition to position 1 (first click) with the other hand.

Why does the airbag light stay on?

The airbag light indicates that something is wrong with the seatbelts or airbags. This means that it’s probably not safe to drive with the airbag light on. If it stays illuminated in your vehicle, we recommend having it towed to the dealership rather than driving it yourself.

How to reset the service light on a Mini Cooper?

Press and hold the trip button.

  • Insert key and turn to position 1.
  • Watch for RESET to appear.
  • Release the button,then press and hold it again.
  • Wait for the RESET to flash.
  • Release the button,and then press and release (once only).
  • Service interval should then be reset to next interval If that didnt work.
  • How do you reset engine light on Mini Cooper?

    – Locate the trip odometer button and depress and hold. – Insert the key into the ignition and partially turn into the first position. – Pay attention to the trip odometer to display the word ‘RESET’. – Release the trip odometer button, then press & hold it again. – The ‘RESET’ message will flash.

    How do you reset tire warning light on Mini Cooper?

    – Locate the reset button positioned in front cabin on the emergency brake handle. – Turn the ignition to position 2, press and hold the reset button until the yellow indicator on the dash lights up for a few seconds. – The vehicle is now ready to recalibrate the TPS system on your next drive.

    How can I reset the airbag light?

    Use your OBD2 scanner to determine if the trouble code is from the faulty airbag sensor.

  • You can also disconnect and reconnect your car’s battery to erase its ECU memory and reset the airbag warning light.
  • If your airbag sensor is faulty,disconnect the battery before working on your airbag to prevent accidental deployment.