Table of Contents
Are Wago connectors code approved?
This is another reason why Wago connectors are a great choice. They meet all of the NEC code requirements regarding splicing and terminating conductors.
Can Wago connectors be used with aluminum wire?
With WAGO Alu-Plus Contact Paste, they can connect aluminum and copper conductors using WAGO’s connectors – quickly, easily and reliably.
Can I use Wago 221 connectors on a ring main?
Yes, but a few points need to be observed to make sure it complies with BS7671 IET 17th Edition. Firstly, the terminals must be installed in a Wagobox (when breaking into existing ring wiring).
Can you use Wago in consumer unit?
IF you are extending cables within the CU then crimps, wagos, spliceline or terminal strip can be used.
Can I use Wago connectors with aluminum wire?
Is it safe to use Wago?
Moreover, all WAGO connectors undergo internal tests with even more stringent demands on quality. Only after these tests have been passed are the products released, giving the user the high level of safety and reliability WAGO is known for.
Can WAGO connectors be used on 12V?
WAGO Kontakttechnik GmbH & Co. KG is a German company that manufactures components for electrical connections and electronic components for the 240V & 12V markets. The company is especially well known for the 221 series connectors.
Are Wagos rated at 32A?
The rating for this compact connector is 400V, 32A. The WAGO 243 series MICRO PushWire connectors are designed for small solid conductors of 0.6mm to 0.8mm diameter.
Can you use Wago connectors on sockets?
You can just put the Wagos in the box behind the socket. Nothing else needed. if you have 3 wires going to each terminal, you’ll need to use 4-way wagos. Connect the three existing wires to each Wago and run just one short length of additional wire to the socket terminal itself.
Do Wago connectors need to be in a box?
WAGOBOX® Light The installer connectors need to be within a suitable enclosure. According to BS 7671, “every connection and termination must be enclosed irrespective of the nominal voltage”. The WAGOBOX® Light junction box meet BS EN 60670-01 and BS EN 60670-22.