How do I reset my DTT thermometer?
Press and release the POWER button. Unit will beep once. Wait until it beeps again twice and only °F shows in the display. Place and hold the thermometer probe firmly to the skin at the temple area and wait several seconds for the device to beep once more.
How do you use a DTT thermometer?
To use your Digital Temple thermometer; simply press the power button (wait for 2 beeps), place round sensor tip on temple, wait for single long beep and read temperature. This Digital Temple thermometer is fast, accurate and cost-effective which makes it ideal for any school clinic!
What does it mean when a thermometer flashing D?
Low battery indicator
Low battery indicator: when the symbol” D “appears, the battery need to be replaced.
How do you use the CVS KD 2202 temple thermometer?
QUICK START
- Install batteries into the device. Make sure the polarity (+ and -) of the batteries.
- Press and release the ON/OFF button, the device will be turned on then ready.
- Place the probe on the measuring site and wait for a few seconds.
- The measurement is completed with beep.
- Read the temperature on the display.
How do I reset my CVS temple thermometer?
The unit will beep once. Wait until it beeps again twice and °F appears in the display. Place and hold the thermometer probe firmly to the skin at the temple and wait several seconds for the device to beep once more….SPECIFICATIONS.
| Temples | |
|---|---|
| Resolution | 0.1°F |
Where should a temple Touch thermometer be placed?
Place the thermometer’s probe in the center of the temple area between the end of the eyebrow and the hairline. Gently press and hold it against the temple to ensure good contact with the skin is maintained (Figures 4a + 4b). Correct placement and good contact with the skin ensure reliable readings. 5.
Why is my temporal thermometer low?
Smudgy/dirty lens: The most common reason for low readings is a smudgy/dirty lens. To resolve, an alcohol dampened Q-tip should be twirled directly on the lens every 2-3 weeks. Like a camera or eyeglasses, the TemporalScanner uses optical technology.
What can I do if my dot thermometer is not working?
My DOT thermometer is not working. All I seem to get is a flashing “NO PROBE”. The probe is inserted correctly. Any clue what’s wrong? We would suggest replacing your DOT’s batteries, as a battery change typically fixes these types of symptoms. It is also possible the probe has failed. If this has happened, a new probe will resolve the issue.
How do I know if my thermometer is accurate?
The best way to verify the accuracy of a probe or digital thermometer is with a proper ice bath test. This can be done quickly and easily at home with the instructions found here. If your DOT’s Pro-Series probe is accurate, it will read within ± 1.8°F of 32°F (30.2 to 33.8°F).
What is the temperature range of the DTT?
Designed to operate in furnaces with typical temperatures of 2200 ° C (4000 ° F), the DTT uses a short wavelength and silicon cell detector to provide a stable measurement which responds quickly and sensitively to temperature changes.
What is DTT and how does it work?
Designed for standalone operation and available in two models optimised for different temperature ranges, DTT provides the communications fibre optic industry a highly precise temperature measurement solution for optical fibre production.