Table of Contents
How do you reset a Badger 5 garbage disposal?
Plug in the unit or restore power and then press the red reset button located next to the slot for the wrenchette. Turn on the faucet and turn on the switch. The machine should run normally. If it stops again, repeat the procedure.
How can I tell how old my InSinkErator is?
The first 2 digits of the Serial Number indicate the year of manufacture (i.e. 15 indicates 2015), while the second 2 digits indicate month of manufacture (i.e. 03 indicates March), in this example the product was manufactured in March of 2015.
How long should you run the garbage disposal?
Ideally, you should only run a garbage disposal for about 30 seconds at a time. This will be more than enough time to break down food scraps and send them down into the drain.
How do you reset an InSinkErator disposal?
Gently press the red button in to reset the disposer. If it does not stay in (retracted), wait ten minutes and try again. Turn on a cold stream of water and turn the disposer switch to “ON” position, the disposer should now run again.
Why do garbage disposals stop working?
If your garbage disposal stopped working to clear waste down the drain, there is likely a clog. When the unit turns on but water backs up into the sink or doesn’t flow into the drain at all, this issue points to a clog either within the garbage disposal or the sink’s drain piping.
Are all InSinkErator models interchangeable?
Designed to be Interchangeable If you have an InSinkErator disposal or are purchasing one for the first time you should know that the company has designed all of their disposals to be installed the same way.
How do you fix a garbage disposal that stops working?
Press the garbage disposal reset button on the bottom of the unit, then try to switch on the unit. Check your main electrical panel to see if the circuit breaker to which the device is connected has tripped. If none of these solve the problem, the garbage disposal installation wiring needs checking.