How long does rustoleum EpoxyShield last?
The average life expectancy of these floors is 3 – 5 years before they start to show their age and even longer if you apply a second coat of clear.
Which is better rustoleum rock solid or EpoxyShield?
“It’s proprietary to Rust-Oleum. This great hard surface is twenty times stronger than regular two-part epoxy paint — even stronger than our EpoxyShield. It’s the best-looking and strongest garage coating you’re going to get.
How many coats of epoxy should you put on a garage floor?
two coats
With a garage epoxy floor, you will want to add at least two coats. Allow at least 12 hours to dry between coats and no more than 48 hours. Although the floor will be touch dry after a few hours, it takes a few days to cure properly.
What temperature should I epoxy my garage floor?
55°F
Minimum floor temperature for coating is 55°F (13°C). Product should be applied when ambient/air temperature is 60-85°F (16-29°C). Concrete floors take a long time to warm up; make sure the previous day has also been at least 60°F (16°C) prior to coating.
How do you prepare garage floor for epoxy?
Instructions
- Clean and Degrease the Floor. Use a broom and wet-dry vacuum to clean debris from the floor.
- Etch the Concrete. Etch the concrete floor using the etching solution provided in the epoxy coating kit, following the manufacturer’s directions.
- Prepare the Room.
- Mix the Epoxy.
- Apply the Epoxy.
- Let the Garage Floor Dry.
Do you have to grind garage floor before epoxy?
Acid etching a garage floor is a great solution for those who are installing the floor themselves and do not have access to industrial grinders. However, for larger commercial jobs, older concrete, or worn floors we always recommend grinding before epoxy installation.
Do I need to etch concrete before epoxy?
The short answer is: Yes, even new concrete needs to be etched before applying epoxy or a similar type of garage floor coating. Etching is part of the concrete preparation process. In fact, proper preparation of the concrete before a coating is applied is the most important part.
How do I prep my floor before epoxy?
Before you apply any coating, you need a clean, dry floor without debris, moisture, cracks or holes. Give the area a thorough sweep. Clean up any grease stains with a degreaser and a stiff brush. You don’t need to remove all of the discoloration, just the greasy residue.
Does vinegar etch concrete?
Etching – Vinegar’s ability to dissolve CaCO3 will dull your marble, travertine, concrete and terrazzo surfaces. It may “clean” the surface but it is also dissolving pits into the finish and effectively dulling it.