What is Aquatuff used for?
Unitor™ Aquatuff™ is a heavy-duty water based alkaline cleaner. It has numerous cleaning applications including removal of greases, waxes, vegetable and animal oils, sludge, soot, carbon deposits, dirt and grime.
How do you use Aquatuff high foam?
Dosing method
- Apply Aquatuff High Foam mixed 10–25% (ratio 1:9 to 1:3) in water, using spray foam equipment.
- Leave for 30–45 minutes. The surface remains wet.
- Wash down with a high pressure unit.
- Repeat the procedure if necessary.
How do you use a slip coat?
Unitor™ Slip-Coat™ is supplied at ready-to use concentration and may be applied directly from the drum. Spray the liquid on the cargo hold surfaces by the use of suitable low-pressure spraying equipment. As soon as the surface appears water wet, a proper film is created; do not apply more than necessary.
How do you use metal Brite?
For removal of rust stains on painted surfaces and wood, Unitor™ Metal Brite™ should be applied at full strength for heavy stains, or diluted to 30–50% for light stains. Allow to soak for 20 to 30 minutes and wash off with water. A second application may be necessary to remove the stubborn stains.
What is Autotreat?
NALFLEET™ AUTOTREAT™ is a multifunctional, liquid boiler water treatment product, formulated with alkaline compounds, scale inhibitor, dispersant, and volatile amines for the protection of the feed, boiler and condensate systems.
What is a slip coat staining?
A slip coat provides a very temporary barrier to apply stain over raw wood with less drag. For example, we like to use a slip coat of mineral spirits when applying General Finishes oil-based Gel Stain to a raw wood surface to allow the stain to slice across the surface more easily.
What is slip coat?
A slip coat is a coating applied to the surface of a seal in order to reduce abrasion and increase seal life. Usually slip coating is applied to glass run channel and other dynamic seal applications.
What is Metal Brite?
Unitor™ Metal Brite H.D™ is a liquid detergent compound containing phosphoric acid and non-ionic surfactants, used for rust removal and as a surface brightener.
How do I increase the P alkalinity in my boiler water?
Whenever boiler water alkalinities fall below the recommended minimum, do not hesitate to increase the feed of alkali (caustic products as NaOH or KOH) or to increase the total alkalinity of the treated water if a softener is involved.
Why is coagulant added to boiler water?
DESCRIPTION. BOILER COAGULANT is a sludge conditioner designed to prevent boiler from water deposits and sludge. Sludge is kept dispersed in small particles and conditioned to be removed by blowdown. It is better to use with the other ERTEK Boiler Treatment products to have maximum performance from the product.
Can I use mineral spirits to remove gel stain?
Mineral spirits will remove wet or tacky gel stain. However, once the gel stain is fully cured, the mineral spirits will have no affect.
How do you remove a slip coat?
Unitor Slip-Coat provides a barrier between the particles and the surface that minimizes this problem, and the particles may now be removed with high pressure water only. The film is completely water soluble and is easy to remove even with cold sea water.
What happens if phosphate levels are too high in boiler?
When the concentration of phosphate in the boiler water is too high, phosphate will react with boiler scale forming iron and iron sodium phosphates or precipitate to form a solid phase on the hot boiler tube surfaces and elsewhere.
What is the difference between P alkalinity and M alkalinity?
Alkalinity P is the alkalinity of the water to pH 8.3, uses a phenolphalein based indicator and represents the alkalinity due to hydroxides plus half the alkalinity due to carbonates. Alkalinity M is a measure of the alkalinity of water to pH 4.5 and uses a methyl orange based indicator.
Which chemical is used in boiler?
Boiler Alkalinity Builders – Potassium Hydroxide or Sodium Hydroxide are the most common boiler alkaline products.. Mostly sold in 25% and 50% in solutions. Amines – Neutralizing amines are considered neturalizing chemicals. Cyclohexylamine, Morpholine, and Diethylaminoethanol.
What is aquatuff used for in cleaning?
It has numerous cleaning applications including removal of greases, waxes, vegetable and animal oils, sludge, soot, carbon deposits, dirt and grime. Unitor™ Aquatuff™ is a highly concentrated alkaline cleaner that is free from hydrocarbon solvents and biodegradable.
What is Unitor aquatuff™?
Unitor™ Aquatuff™ is a heavy-duty water based alkaline cleaner. It has numerous cleaning applications including removal of greases, waxes, vegetable and animal oils, sludge, soot, carbon deposits, dirt and grime. Unitor™ Aquatuff™ is a highly concentrated alkaline cleaner that is free from hydrocarbon solvents and biodegradable.
What is aquatuff high foam?
Unitor Aquatuff High Foam is a heavy duty alkaline cleaner with good foaming qualities specially formulated for cleaning cargo holds on bulk carriers and OBOs. Aquatuff High Foam is specially developed for cargo hold cleaning, but may also be used for other cleaning applications where Aquatuff normally is used but where high foam is beneficial.
How do you clean Unitor™ aquatuff high foam?
Always perform final rinse with fresh water after wash down to avoid salt residues on the surface. If Unitor™ Slip-Coat (Product no. 652 737015 and 652 737023) is applied to the cargo hold surfaces prior to loading, the concentration of Unitor™ Aquatuff High Foam in the cleaning solution may be reduced.