What is suspension valving?
The size, thickness and number of shims in a stack helps create the action of the suspension and is commonly referred to as “The Setting” or “Valving”. This shim stack is primarily what is changed in a suspension “Revalve”. Factory Connection works very hard to utilize the OEM pistons in its performance modifications.
What does Revalving a shock mean?
Re-valving is the setting and in turn, the action of the suspension is specific to the riders needs, skill set, and riding style. Simply put, it is setting the valves that control the flow of oil based on your specific needs.
How can I make my suspension softer?
Thankfully with these tips, you can adjust the suspension to enjoy your ride a bit more:
- Start by installing softer shocks and struts.
- If you have adjustable shocks, adjust them to a softer setting.
- Install softer springs.
- Replace the bushings in the suspension.
- Replace the sway bars with smaller bars.
How does motorcycle suspension work?
Motorcycle suspensions use a spring and damper combination to isolate the chassis and rider from road imperfections. On-road motorcycle suspension systems work to minimize the effect of potholes, bumps, cornering and acceleration/deceleration forces.
Should I Revalve my dirt bike suspension?
The reason to revalve your suspension is to customize it so it works perfectly for you. As an example, if you push the front end really hard into corners on the track, you’ll want a stiffer fork valving.
What makes suspension comfortable?
The most effective way to make a car’s suspension more comfortable is to make the dampers softer. Using lighter wheels and suspension components allows us to use even softer dampers, giving an even comfier ride with relatively little effect on performance.
What is suspension system in bike?
Bicycle suspension is the system, or systems, used to suspend the rider and bicycle in order to insulate them from the roughness of the terrain. Bicycle suspension is used primarily on mountain bikes, but is also common on hybrid bicycles.
How does pre load work?
Preload is a measurement of how much a spring is compressed at full extension of the shock. Thread the upper spring adjuster down until it just touches the spring, you are now at 0″ of preload. Every inch you thread it down from there is 1″ of preload. With a 1.0 Motion Ratio that also lifts the vehicle 1″.
Where can I get a shock valving guide for my vehicle?
For one-on-one help selecting the right shocks and valving for your vehicle, contact the team over at Filthy Motorsports. This shock valving guide is ©Copyright Crawlpedia.com – Do not repost or reprint without written permission.
Do king shock dealers provide custom valving?
All reputable King Shock dealers should provide custom valving when you order the shocks and follow up with fine-tuning help afterwards.
What are shock valving shims?
Shock valving shims are precision machined in various thicknesses and are heat treated to hold up to temperatures exceeding 500 degrees without losing strength. The most common configuration is a pyramid style stack made up of progressively smaller diameter shims which offers excellent damping at all speeds.
What is suspension fundamentals – powered by Bilstein Academy?
Whether it’s installation tips, specific solutions to problems or new technologies such as air suspension modules and semi-active suspensions, “Suspension Fundamentals – powered by BILSTEIN Academy” will turn you into real suspension professionals! Our workshop tips in video format are presented by racing driver Nico Bastian.