Table of Contents
What is ADC formula?
ADC has a resolution of one part in 4,096, where 212 = 4,096. Thus, a 12-bit ADC with a maximum input of 10 VDC can resolve the measurement into 10 VDC/4096 = 0.00244 VDC = 2.44 mV. Similarly, for the same 0 to 10 VDC range, a 16-bit ADC resolution is 10/216 = 10/65,536 = 0.153 mV.
What are ADC techniques?
There are really five major types of ADCs in use today:
- Successive Approximation (SAR) ADC.
- Delta-sigma (ΔΣ) ADC.
- Dual Slope ADC.
- Pipelined ADC.
- Flash ADC.
Why do we convert analogue to digital?
Analog to Digital Conversion An analog to digital converter (ADC), converts any analog signal into quantifiable data, which makes it easier to process and store, as well as more accurate and reliable by minimizing errors.
What is resolution in ADC?
Resolution. The ADC resolution is defined as the smallest incremental voltage that can be recognized and thus causes a change in the digital output. It is expressed as the number of bits output by the ADC. Therefore, an ADC which converts the analog signal to a 12-bit digital value has a resolution of 12 bits.
What is step size of ADC?
The step size is the voltage difference between one digital level (i.e. 0001) and the next one (i.e. 0010 or 0000). For example if an ADC has a step size of 1 Volt an input of 1 volt will produce an output, in a 4 bit converter, of 0001.
Which type of logic is used in ADCs?
The SAR ADC a most modern ADC IC and much faster than dual slope and flash ADCs since it uses a digital logic that converges the analog input voltage to the closest value. This circuit consists of a comparator, output latches, successive approximation register (SAR), and D/A converter.
What is reference voltage in ADC?
The ADC core already needs a 2.5V supply. The voltage reference (such as LTC6655-5) needs a supply that is higher than 5V.
What is quantization in ADC?
An analog-to-digital converter (ADC) can be modeled as two processes: sampling and quantization. Sampling converts a time-varying voltage signal into a discrete-time signal, a sequence of real numbers. Quantization replaces each real number with an approximation from a finite set of discrete values.
What is the conversion time of ADC?
Digital Systems A typical ADC device is characterized by a maximum conversion time of 40 μs.
What is SNR in ADC?
SNR is a calculated value that represents the ratio of rms signal to rms noise. You then multiply the log10 of this ratio by 20 to derive SNR in decibels. As I mention above, an ADC’s ideal SNR equals 6.02N+1.76 dB, where N is the number of bits. You derive this formula by first defining the rms signal.
What is sampling frequency in ADC?
Sampling frequency: it is the frequency at which the ADC samples the analogue signal (usually in number of samples per second (Hz))
Is there a free practice test for the ADC?
Free Practice Tests. The Alcohol and Drug Counselor Exam (ADC) is an important credential for anyone working in addiction services. The exam is produced by the International Certification and Reciprocity Consortium (IC&RC) and its member boards and administered by Iso-Quality Testing, Inc. The exam’s 150 multiple-choice questions seek…
Why ADC interview questions and answers?
Moreover, adc interview questions and answers are provided for experienced and fresher’s candidates as well. Besides, you can easily set your mind to crack an interview based on your knowledge and preparation. We provide a high level of content to get a shortlist in your interview and get your dream job.
How to solve the problems of ADC?
Application note of the ADC usually presents solutions for such problems. It seems that the solution must be focused mainly on the PCB design (the power layer, the ground layer, vias to ground layers, filtering capacitors….). However, using BALUNSs (balance to unbalance transformers) at the input of ADC is very effective.
How do I register for the ADC exam?
Before registering for the ADC exam, you must go to the IC&RC website to determine how to contact your local member board. Your local Member Board will establish your eligibility and approve you to sit for the ADC exam. Because each Member Board sets their own eligibility requirements and fees, they can vary from region to region.