How do I change the pressure on my ResMed Elite 2?
To adjust your EPR, enter the programming mode on your ResMed S8 Elite 2 CPAP machine. To change the EPR level, select the left slash to the left of the up and down arrows. Press the up arrow or down arrow until you see the setting that you require.
What should my CPAP pressure be?
For most people, an appropriate CPAP pressure is between 6 and 14 cmH2O, with an average of 10 cmH2O. Your sleep specialist can help you determine what specific level is right for you. Over time, your CPAP device pressure may require adjusting.
What is the best sleeping position for CPAP?
Sleeping on your side is one of the best positions for sleep apnea treatment, since it prevents gravity from impacting your airway the way it does when sleeping on your back or stomach. Unfortunately, side sleepers sometimes struggle to find the right CPAP mask.
How do I adjust the humidity on my resmed CPAP machine?
From your machine’s Home screen: For humidity: Turn the dial to highlight the water drop icon; push the dial, turning the background yellow. Then turn the dial again to set the humidity (1–6, default setting is 3). Push the dial once more to set the new humidity level.
What is the difference between ResMed AutoSet and elite?
The ResMed AirSense 10 comes in three models: The Elite version of the machine, which provides a fixed air pressure. The standard AutoSet edition of the machine, which is an automatic model that retains the visual look of the Elite.
Should humidifier be high or low?
The higher up off the floor the humidifier is placed the better. It produces a mist that has to get mixed with the air. When the humidifier is placed on the floor, the mist has no chance to get mixed with the air and it causes wet floors. Try to put it on a nightstand or a table.
What is the difference between airsense 10 elite and humidifier?
AirSense 10 Elite The AirSense 10 Elite device is indicated for the treatment of obstructive sleep apnoea (OSA) in patients weighing more than 30 kg. It is intended for home and hospital use. The humidifier is intended for single patient use in the home environment and re-use in a hospital/institutional environment. Clinical benefits
What is the best humidifier for sleep apnoea?
AirSense 10 Elite The AirSense 10 Elite device is indicated for the treatment of obstructive sleep apnoea (OSA) in patients weighing more than 30 kg. It is intended for home and hospital use. The humidifier is intended for single patient use in the home environment and re-use in a hospital/institutional environment.
How do I replace the air in my humidifier?
Hold the humidifier at the top and bottom, press it gently and pull it away from the device. 2. Open the humidifier and discard any remaining water. 3. Hold the cuff of the air tubing and gently pull it away from the device.
Is ResMed compliant with the Federal Aviation Administration requirements?
Aircraft use ResMed confirms that device meets the Federal Aviation Administration (FAA) requirements (RTCA/DO-160, section 21, category M) for all phases of air travel. Wireless module Technology used: 4G, 3G, 2G It is recommended that the device is a minimum distance of 0.8″ (2 cm) from the body during operation.