How much is a sheet of Aluminium checker plate?
Aluminium Checker Plate
| Size (mm) | Length | $ / sheet |
|---|---|---|
| 2.0mm | 600 x 600 | $46.56 |
| 2.0mm | 1200 x 1200 | $132.30 |
| 2.0mm | 1200 x 2400 | $249.19 |
| 2.5mm | 300 x 300 | $25.14 |
What size sheets does checker plate come in?
Checker steel plate thickness 10 mm, length 1.35 m, width 0.9 m. Plate steel floor rolled checkered size: length 2500 mm × width 1250 mm × thickness 6 mm. MS checker plate with size: 9 mm – 12 mm thickness × 1524 mm × 3048 mm. Checkered plate in sheet thickness 2, 2.5, 4.0, 6.0 mm and size 1220 × 2440 mm.
What size are Aluminium checker plates?
Aluminium Checker plate dimensions
| Size (mm) | Approx kg/sheet | Finish |
|---|---|---|
| 3 x 1500 x 3600 | 48 | Five Bar |
| 5 x 1200 x 2400 | 40 | Five Bar |
| 6 x 1200 x 2400 | 52 | Five Bar |
| 1.6 x 1200 x 2400 | 13 | Propellor |
What is Aluminium checker plate used for?
Chequer / Checker plate is used in decorative, architectural applications and shipbuilding – (because it is anti-corrosive and it doesn’t require painting so it is low maintenance).
How strong is 2 mm checker plate?
Its tensile strength is 200N per square millimeter. And it also has a very high elongation of more htan 10%, which make it withstand high bending without cracking. At the same time, different alloy elements give it more advantages.
How strong is 2mm Aluminium?
The 2mm aluminium sheet we stock is 1050A grade. This is a popular grade of aluminium for general sheet metal work where moderate strength is required. This 1050 alloy is known for its excellent corrosion resistance, high ductility and highly reflective finish blue/silver apperance.
How are checker plates measured?
Most reputable aluminium suppliers and manufacturers will agree that when specifying the thickness of checker plate material the measurement should be taken from the flat area of the sheet, not from the raised checker pattern.
What is the thinnest aluminium checker plate?
The aluminium chequer plate is available in thicknesses from 1.5 mm to 5 mm. The height of the checker depends on the sheet thickness, but is always between 0.5 mm and 1.5 mm.
Are aluminium checker plates heat resistant?
The metal components of a chequer plate sheet make it highly resistant to heat, dust, corrosion and chemicals. Therefore, you can install it in treatment plants, oil production platforms and chemical workshops.
How do you cut aluminium checker plates?
Aluminum cuts very nicely with a circular saw. Get yourself a new carbide-tipped blade (and some earplugs), clamp a guide to the plate on both sides of the saw, and lower the blade about 1cm past the metal. Push slowly. A well-used blade, or non-carbide blade, will do a spectacularly poor job.
What thickness aluminium do I need?
If the thickness is too thin, it is easy to deform. Therefore, it is recommended that you use aluminum with a thickness of more than 2.0 mm such as 3 mm aluminium plate. Large-area carving will reduce the deformation resistance and rigidity of the aluminum plate.
How strong is 3mm aluminium plate?
Sheet – 1.5mm to 3mm
| Tensile Strength | 210 – 260 MPa |
|---|---|
| Proof Stress | 130 Min MPa |
| Hardness Brinell | 61 HB |
How strong is 3mm aluminum sheet?
The 3mm aluminium sheet we stock is 1050A grade. This is a popular grade of aluminium for general sheet metal work where moderate strength is required. This 1050 alloy is known for its excellent corrosion resistance, high ductility and highly reflective finish blue/silver apperance.
What thickness aluminum do I need?
Can a Mitre saw cut aluminum?
You can cut aluminum on a chop saw (miter saw) with a non-ferrous metal cutting blade.