Table of Contents
How much does Sansin stain cost?
Options
| SKU: | Name | Price |
|---|---|---|
| P200-SDFNATS-1GAL | SDF Naturals Colors 1-gal | $86.16 |
| P200-SDFNATS-5GAL | SDF Naturals Colors 5-gal | $396.32 |
| P200-SDFSATS-1GAL | SDF Saturated Colors 1-gal | $92.97 |
| P200-SDFSATS-5GAL | SDF Saturated Colors 5-gal | $427.68 |
How long does it take for Sansin stain to dry?
1 hour
of Sansin extender. Allow 1 hour for drying in proper conditions when the temperature is 70°F (21°C) and the relative humidity is higher than 50%. For deeper color request a stronger formula from your dealer. When using a tinted product be sure to stir well before and during application.
Is Sansin SDF water based?
Thanks to SDF’s unique water-borne technology, it can provide complete protection in just one coat – although a second coat will provide an even more beautiful and richer finish. And because SDF is designed to be highly water-repellent, it’s a natural choice for homes and structures in moisture-rich environments.
How do you remove Sansin stains?
Dissolve the bag of Sansin Wood Lightener® in 1.5-2 gallons (5.75-7.5 L) of water, depending on the degree of brightening you require. Spray the Sansin Wood Lightener® evenly on cleaned wood surface. Allow the Sansin Wood Lightener® to neutralize the treated wood surface for at least 10 minutes. Rinse off with water.
Is Sansin a good stain?
Sansin SDF and Dec both deliver a beautiful low-lustre finish that is easy to maintain and highly breathable. For a higher-lustre finish – and extreme UV protection – use Sansin ENS as a standalone system or as a topcoat.
What is SDF wood?
DESCRIPTION Sansin SDF is an environmentally-friendly one-coat wood finish designed for siding, decks and. fences. It is UV resistant, water-repellent, low in VOC’s, and non-flammable with easy soap and water clean-up.
How do you wash Sansin wood?
Simply spray your wood surface, allow to sit for up to 20 minutes, rinse off and let dry. Then apply the attached package of Sansin Wood Lightener – and watch as the beautiful natural color of your wood emerges as it dries.
Is Sansin SDF oil based?
Sansin’s modified natural oils and resins are impregnated with special UV protectants so every exposed cell of your wood is protected. Because of their unique formulation, Sansin Enviro Stains also protect naturally against wood decay.
How do I use Sansin in December?
Use Sansin cleaner and/or wash the entire surface with a minimum 3000 PSI pressure washer use clean water. Sand the surface well using a 60-80 grit paper and a variable speed orbital sander. Follow by power washing, vacuuming or using compressed air for proper cleaning.
What deck stain do contractors use?
Superdeck Semi-Transparent Deck Stain The stain is often used by contractors; however, do-it-yourself homeowners were not as familiar with the product. It is an oil-based stain with a recommended one coat application.
Is HDF cheaper than plywood?
Both HDF and MDF have a very smooth surface (easier to paint!), and can be easily cut for designs. They cost about 20% lesser than regular plywood and, hence, are a more economical choice (HDF is more expensive than MDF).
What is a wood wash?
Wood Wash is a translucent coating that subtly softens and ages the appearance of bare timber. Translucent wood stain. Highlights the wood grain. Replicates the look of limed or bleached timber.