How wide should the openings in a butterfly house be?
Step 2 – Adding Butterfly Entrances Making the frame is just the beginning of this project. Now, you need to create the openings that the butterflies will enter. Use your tape measure and pencil to measure out (5) 3″ tall by 3/8″ wide slits, (2) on each side and (1) in the middle.
How wide are the slots in a butterfly house?
Mark and cut the slots. Slots are 3/8 wide x 4 inches long (I have seen plans where the slots are 1/2 inches wide – must be for some pretty sizable butterflies.
How big should butterfly house be?
about 2 1/2 feet tall
Butterfly houses are generally tall, narrow wooden boxes of simple construction. A wooden box about 2 1/2 feet tall, 8 inches wide and 8 inches deep with a hinged roof and slats in the front would work just fine.
Which direction should a butterfly house face?
The boxes are normally erected in or near flower gardens a few feet above the ground. Some proponents even go so far as to recommend that butterfly boxes be placed facing the south.
Do butterfly houses have bottoms?
A butterfly house is basically a simple box. It’s just four sides, a bottom, and a roof. One side needs to be hinged to maintain the interior of the house.
What direction should a butterfly house face?
How high should a butterfly house be hung?
approximately four feet high
Place your butterfly house approximately four feet high on a post, fence, or tree in an area sheltered from strong winds. Wind movement makes butterflies feel unsafe, so it is not a good idea to hang the house where it might sway.
Do you put anything in a butterfly house?
Willow, elm, buckthorn, nettles and hops serve as host plants for the butterflies mentioned earlier. Plant a variety of nectar plants around the butterfly house such as asters, milkweed, phlox, purple coneflower, and wild bergamot. A butterfly house is a beautiful addition to any garden.
Should butterfly house be sun or shade?
sunny
Your butterfly house should be placed in a sunny location in the garden away from prevailing winds. It should be mounted on a pole or tree about 4 feet off the ground. Inside the house, place a couple slabs of tree bark in a vertical position. This is to provide the butterflies more shelter and something to cling to.
How high off the ground should a butterfly house be?
House Placement and Landscaping Place your butterfly house approximately four feet high on a post, fence, or tree in an area sheltered from strong winds. Wind movement makes butterflies feel unsafe, so it is not a good idea to hang the house where it might sway.
What are the dimensions of a butterfly house?
This butterfly house does just that, and it’s easy to build. Out of the 1″ x 6″ x 8′ cut … Left side – 5-1/2″W x 21-7/8″L* (*Note: Back edge is 21-7/8″L, and front edge is 16-3/8″L.
How do you build a simple butterfly house?
Simple butterfly house plans – plans include a free PDF download, material list, measurements, and drawings. Cut two boards 5″ x1 2″ for the front and back (A). Cut 45-degree angle cuts for the roof top, see drawing above for details. Cut the slots to the front as shown on drawing above.
How do you make a butterfly house out of galvanized nails?
Pre-drill all holes and assemble the butterfly house using 1 1/2″ galvanized finishing nails. Use 1/2″ pan head screws to attach the 3/4″ pipe straps. Pre-drill holes and use a 1 1/2″ galvanized finishing nail on the sides to make one side pivot. See drawing above for details. Use a 1 1/2″ deck screw as a door lock, see drawing above.
How do you mount a butterfly box in the garden?
Mount the finished garden butterfly box to a post in the garden. To use a section of ¾” copper pipe as a post, attach a small piece wood (approximately 6″ long x 3″ wide x 1-½” thick) to the inside of the butterfly house, securing it from the back with a couple of nails or screws.