What Mustangs have solid rear axles?
Which Mustangs Use a Solid Rear Axle? Mustangs made from 1964.5 to 2014 use a solid rear axle set-up. The notable exceptions are the SVT Cobra models from 1999-2004, which used an independent rear suspension. These rare performance models are tough to find (and some have even been converted to solid axles).
What were the options on 1965 Mustang?
The sporty GT option was offered in 1965 consisted of; manual front disc brakes, grille mounted fog lights, with grill bar, GT gas cap, F70x14 tires, GT rocker paint stripes, GT side emblems, special exhaust trumpets protruding through the rear valance, Special handling components, Special 5 gauge instrument cluster.
What axle came in a 65 Mustang?
1965 Ford Mustang Axle Information & Ratios
| Axle code | Ratio & type |
|---|---|
| 2 | 2.83 open differential |
| B | 2.83 locking differential |
| 1 | 3.00 open differential |
| A | 3.00 locking differential |
How wide is a 66 Mustang rear end?
How To Spot, Build, And Swap In the Ford 8.8 Mustang Rearend.
| Vehicle Application | Axle Width (inches) |
|---|---|
| ’65-’66 Mustang | 57 11/44 |
| ’67-’70 Mustang 8.0 | 59 51/48 |
| ’71-’73 Mustang | 61 11/44 |
| ’67-’71 Comet, Cougar | 59 11/44 |
How much horsepower can 31 spline axles?
Bolt-on billet aluminum brake registers are machined to size based on your particular brake and wheel requirements. S/S 28- & 31-Spline Axles (28-spline up to 400 hp1, 31-spline up to 500 hp1) For street and handling performance applications, 31-spline S/S axles are recommended.
How wide is a 1966 Mustang rear end?
Is a Ford 8.8 the same as a Ford 9 inch?
Here, the 8.8 and the 12-bolt are identical at 1.625 inches and in fact use the same pinion bearings. By comparison, the Ford 9-inch pinion shaft measures only 1.313 inches. The Achilles’ heel of the stock 8.8 Ford rearend is its 28-spline axles, especially when compared to the Chevy 12-bolt’s stronger 30 splines.
What is a live rear axle Mustang?
A live axle rear is a very simple rear diff and rear suspension setup. It’s basically just a horizontal tube, with axles that connect the outside brakes/wheels to the inner differential, which then connects to the drive shaft. Poof. That’s all there is.
What year did the Ford Mustang get a rear axle?
Starting in 2011, both the V6 (3.7L) and V8 (5.0L Coyote) Mustangs used the Ford 8.8 rear end. Ok so you know what Mustang rear axle assembly went into what years – now let’s look at what axles are in your Mustang rear end.
What is the differential ratio for a 1965 Ford Mustang?
1965 Ford Mustang Axle Information & Ratios Axle code Ratio & type 6 2.80 open differential F 2.80 locking differential 2 2.83 open differential B 2.83 locking differential
How many spline axles does a Mustang have?
For 2011-2014 Mustangs, both the V6 and 5.0L V8 Mustang were equipped with 31 spline axles. Now that we’ve cleared up the issue of what rear end you have and what Mustang axles are in your rear end cleared up – does this mean that your Mustang is still equipped with the rear end that it had from Ford?
What kind of rear end does a Ford Mustang have?
Starting in 1986 Ford introduced the popular 8.8” rear end in the Mustang. From 1986-2010 the Ford Mustang 8.8 rear end went into all V8 Mustangs (5.0L, 4.6L and 5.4L) and the Ford 7.5” rear end went into all 4 cylinder (2.3L) and V6 Mustangs (3.8L).