What does createx balancing clear do?
4030 Balancing Clear is a clear, water-based, urethane paint which is useful in several applications. Add 4030 Balancing Clear 10% per volume to any of the Createx paints to optimize flow or to increase adhesion and durability on hard or non-porous surfaces.
What cleaner do you use for airbrush?
Soak the needle cap, nozzle, and nozzle cap in rubbing alcohol (99% isopropyl alcohol). Wipe the needle clean with the same solution. Once every part is clean, re-assembly the airbrush according to the manufacturer’s instructions.
What is the best way to clean an airbrush?
CLEAN THE NOZZLE AND CAPS To loosen paint, soak your nozzle, needle cap, nozzle head cap (if compression nozzle) and nozzle cap in Medea Airbrush Cleaner (or solvent) for NO MORE than 10 minutes. NEVER soak your entire airbrush in liquid. Never store your airbrush with spray medium or cleaning agents in the fluid cup.
Can you sand Createx paint?
Createx paints are compatible with any primer, paint, and clear type as well as OEM finish. If applying a primer, allow it to thoroughly dry, then sand or scuff before applying paint. Sandpaper 320 – 800 grit may be used to prepare for Createx paints.
What kind of paint is Createx?
acrylic resin
Createx Airbrush Colors are water-based paints made with an acrylic resin that is soft, creating what we call a “soft-hand feel” on fabrics.
Can you sand createx paint?
What is the difference between createx 4011 and 4012?
A water-based thinner for use with most Createx paints. Recommended for use with AutoBorne Sealers and when painting direct to a primer or substrate as 4012 Reducer allows paint to penetrate the substrate deeper compared to 4011 Reducer.
Is Createx water-based?
Createx is a water-based paint that can be used straight out of the bottle with larger nozzle airbrushes or reduced with 4011 or other reducers for use in small nozzle fine detail airbrushes.
Does Createx paint need primer?
Createx paints are compatible with any primer, paint, and clear type as well as OEM finish. If applying a primer, allow it to thoroughly dry, then sand or scuff before applying paint.
How long does createx take to dry?
48 Hours Drying Required for a Full Cure – Even after Createx paints have dried and are safe to tape or top-coat with a clear, they’re still in the process of curing. Best adhesion and hardness of the coating is after the initial after 48 hours.
What is the difference between airbrush thinner and cleaner?
Airbrush cleaner is much stronger than thinners and will melt plastic. It will break down paint inside your airbrush much better than thinners and flush it out completely.